Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Expeller'
6 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
)
)
)
Screw Press 60-70 TPD
Asset ID: 8403
Available: 1
Krupp EP-07 Press, used. We have primed and painted and cleaned it inside and out so the press actually looks as good as if it had been rebuilt. Used As Is, The last application was soybeans where it was running at a capacity of 60-70 TPD on extruded soybean material. Solid Shaft. Discharge has Lump Breaker installed. The press comes with 150 H.P. motor 230/460v 3/60, V-belt drive with pulley. Capacity up to 75 to 80 TPD. It has been setup for a full pressing application but was originally a pre-press and should be able to reconfigured to that (pre-press) if desired.
Asset ID: 8403
Available: 1
Screw Press 60-70 TPD
Krupp EP-07 Press, used. We have primed and painted and cleaned it inside and out so the press actually looks as good as if it had been rebuilt. Used As Is, The last application was soybeans where it was running at a capacity of 60-70 TPD on extruded soybean material. Solid Shaft....
Press 60 to 95 MTPD
Asset ID: 5450
Available: 2
Shann Full Press Model 9-99RT Serial Numbers 3294-1 and 3294-2. Motor HP 370. Brand New - never used or installed. Capacity at Full Press rated to 60 MTPD on soybean - with extruder ahead of it can do 95 MTPD. All parts are there - complete press. RT design allows the press to be reversed in case of an overload. Quantity (2) sold together as a lot.
Asset ID: 5450
Available: 2
Press 60 to 95 MTPD
Shann Full Press Model 9-99RT Serial Numbers 3294-1 and 3294-2. Motor HP 370. Brand New - never used or installed. Capacity at Full Press rated to 60 MTPD on soybean - with extruder ahead of it can do 95 MTPD. All parts are there - complete press....
Press, Oil Press 60-150 TPD
Asset ID: 1466
Available: 1
### Goyum Oil Press Model G-1500 ###
This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 with 180HP ABB motor. Built 2007.
- Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.).
- Triple Reduction Gear Box with helical gears of cast steel and pinion shafts of special steel. Gearbox is aligned with all the bodies on a single fabricated base.
- This expeller has Three chambers of Cast Steel, vertically hinged. Each of 36" long.
- Cake thickness can be adjusted on running Machine.
- Worm Assembly, discharge ring, compression ring are all hard faced welded.
- Main Worm Shaft can be withdrawn without disturbing the Gear Box. The shaft is water cooled.
- Crammer Shaft for extra cramming of the Seed or Cake in the feed body is completely supported on Bearings.
Overall Machine Dimensions approx Length:3550 mm, Breadth:1300 mm, Height:3600 mm (including motor for kettle gearbox)
Asset ID: 1466
Available: 1
Press, Oil Press 60-150 TPD
### Goyum Oil Press Model G-1500 ### This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 with 180HP ABB motor. Built 2007....
Press, Oil Press 60-150 TPD
Asset ID: 1470
Available: 1
NEW, never installed. Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.). This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 Has NO Motor. (Designed for 180HP). Built 2007.
Triple Reduction Gear Box with helical gears of cast steel and pinion shafts of special steel. Gearbox is aligned with all the bodies on a single fabricated base.
This expeller has Three chambers of Cast Steel, vertically hinged. Each of 36" long. Two of the 3 cage assemblies have been removed.
Cake thickness can be adjusted on running Machine.
Worm Assembly, discharge ring, compression ring are all hard faced welded.
Main Worm Shaft can be withdrawn without disturbing the Gear Box. The shaft is water cooled.
Crammer Shaft for extra cramming of the Seed or Cake in the feed body is completely supported on Bearings.
Overall Machine Dimensions (Approx.) Length:3550mm, Breadth:1300mm, Height:3600mm (including motor for kettle gearbox)
Asset ID: 1470
Available: 1
Press, Oil Press 60-150 TPD
NEW, never installed. Goyum oil press Model G-1500. Capacity: 140 to 150 Ton (In 24 Hours) in pre-pressing and 50-60 Ton in Single & Final crushing (Capacity differs with material density & quantity of oil in it.). This model has been designed in a simple and symmetrical shape....
Screw Press, Sprout Bauer 100 tpd
Asset ID: B2107
Available: 3
Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details. Qty (3) presses - priced separately
Asset ID: B2107
Available: 3
Screw Press, Sprout Bauer 100 tpd
Screw Press dewatering press by Andritz Sprout-Bauer Model 575. Main drive Siemens 75 HP motor 460/360 at 1780 rpm. With Falk gear reducer. Capacity approximately 100 short tons per day (tpd) depending on feed stock. Last used for pressing corn germ. See drawing in Links for details....
Screw Press
Asset ID: 2353
Available: 1
Vincent Compact Press Model CP-4
- Continuous dewatering press. Graduated pitch, interrupted flight screw to maximize dewatering. Final pressing is controlled by a discharge cone
- Capacity 150 to 500 lbs/hr (0.5 to 1 tpd)
- 1.5 HP motor 230/460 3/60 - include VFD
- Model CP-4, serial number 19019-1
- All contact parts ss304
Very few hours - close to 85 total.