Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Cooling tower'
3 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
)
Cooling Tower 680 ton
Asset ID: 7553
Available: 1
Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP. Built 1992 Comes in 3 sections.
Asset ID: 7553
Available: 1
Cooling Tower 680 ton
Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP....
Cooling Tower & Pump 60 ton
Asset ID: 2056
Available: 1
CTS cooling tower and recirculating pump. This is a counter flow induced draft FRP water cooling tower. Tower has a 1.5 HP fan and 1HP condenser. The nameplate is worn off but this is most likely a T-260 tower rated at 60 tons. Cooling capacity 900,000 BTU/hr, air volume 14,700 cfm. Tower size approx 78" dia x 74" tall. Water circulating pump is approx 77.5 gpm with a Bell & Gossett size e-1532 size 2BD, pump construction SSF impeller dia 8" serial number C286138-01G91 with a 5HP motor 1800 rpm. This is an end suction close coupled foot mounted pump. See link for pump specs and tower specs (most likely the right model number). Part of Gryphon biomass drying system asset 2042 - NOT sold separately. Part of an entire CBD extraction system - enter PK6020 to see all components.
Asset ID: 2056
Available: 1
Cooling Tower & Pump 60 ton
CTS cooling tower and recirculating pump. This is a counter flow induced draft FRP water cooling tower. Tower has a 1.5 HP fan and 1HP condenser. The nameplate is worn off but this is most likely a T-260 tower rated at 60 tons. Cooling capacity 900,000 BTU/hr, air volume 14,700 cfm....
Cooling Towers
Asset ID: 2092
Available: 4
### Modular Portable Cooling Towers 3,000 ton each (45 MMBTU/hr) ###
These Veritec cooling towers are designed and manufactured to provide the most cooling possible while maintaining easy portability. These units are completely self - contained and can be up and running within hours of arriving on the job site. If needed, portable pumping units and reservoir tanks can also be provided. Nominal Rating - 3000 tons (9000 GPM I 95F HW I BSF CW I 78 degree wet bulb). Steel basin, 4 fans per cell. New in 2021 and were in service 2 years in Louisiana. During that 2 years they ran only 6 months, then were placed in storage. Last inspected about 18 months ago - no issues and no rust. Qty (4) - priced separately