Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Essential oil & cbd'
2 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Include all
Manufacturer
Include all
Condition
Include all
Motor HP
Include all
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
)
)
Oil Extraction System, Ethanol 1.5 TPD
Asset ID: PK-6020
Available: 1
Biomass drying and ethanol solvent extractor system, last used for producing CBD Extract by drying hemp at 3,000 #/day infeed and approximately 1,000 #/day dry mass outlet. Was running hemp with infeed moisture of 50-80% and outlet moisture of 7% to 11% moisture. CBD extraction efficiency is very good. Unit was purchased new in 2019 - only has 1,289 hours operation. Main components include Gryphon gas fired dryer, ribbon blender, Watermark filter press system, Nutsche filter, BizzyBee distillation system, tanks. See Links for equipment list and process flow chart.For all components enter the key word pk6020 in search box..
Asset ID: PK-6020
Available: 1
Oil Extraction System, Ethanol 1.5 TPD
Biomass drying and ethanol solvent extractor system, last used for producing CBD Extract by drying hemp at 3,000 #/day infeed and approximately 1,000 #/day dry mass outlet. Was running hemp with infeed moisture of 50-80% and outlet moisture of 7% to 11% moisture....
Oil Extraction System, Butane 1 TPD
Asset ID: PK-6030
Available: 1
### Hydrocarbon Butane Natural Oil Extraction System ###
Rated at approximately 1 TPD (ton per day). Last used to extract CBD, can be used for essential oils. Complete continuous system. Installed NEW in 2020 and idled in 2021. It ran only 5 to 6 batches - very few hours.
- Batch Process designed for 1000 lbs of hemp per run lasting 6 to 8 hours.
- (3) butane process pressure tanks 420 gallon horizontal insulated. ASME MAWP 250 psig at 100F with water jacket MAWP 15 psig.
- Chiller 10 tonR. Temtek BCD-10A air cooled water chiller. Motor 10 HP, refrigerant R-410A
- Alfa Laval plate heat exchanger 84 sf, model M6-Base
- Shell and tube heat exchanger Alleghany Bradford, MAWP shell/tube rated at 150 psig at 350F
- Rosedale ss cartridge filter, model SAN830
- Delta T Systems glycol cooling controls, Model EUW-36E. Heater 36 kw, pump 1.5 HP 230v 3/60
- (2) stainless steel jacketed tanks, Lee Tank 40 gallon capacity. MAWP tank 45 psig at 350F, Jacket 100 psi at 350F. Full vacuum vessel internal.
- Transformer 75 kva MGM. 3-phase 480v to 240v/120 CT
- Process pump, piping
- Most equipment is Like New - Purchased new in 2020. See equipment list
We have many photos of this system. Please ask for an invitation to our VDR (Virtual Data Room) to view.