Solutions 4 Manufacturing

Vertical Tanks ss

Asset ID: 1966

Available: 5

Vertical insulated stainless steel tank, working capacity 5,548 gallons (21,000 liters). NEW - still at factory in China. Tank is stainless 316 with insulation and ss304 cladding. Tanks are designed for and built to ASME at an internal design pressure 7.5 bar (112.5 psig) and a working pressure of 6.5 bar (94.25 psig) although they are not certified by ASME. On legs for OAH 7892 mm (25.9 ft). Flange connections are metric 200mm pipe RF flange. Side 500mm manhole. Tanks were for a project that wasn't built. On factory floor now as surplus, ready to ship. Priced as each tank. See tank drawing.

Vertical Tank 29,000 gallon

Asset ID: 1997

Available: 1

### Vertical carbon steel tanks 29,000 gallon capacity ### - Selling as a "LOT" of 10 tanks - Tank size is 11 ft - 9 in diameter x 36 ft tall with 1/4 inch wall. - All tanks have a top mounted radar level detector and transmitter - Flat bottom/slight cone top with gooseneck vent. - Designed as atmospheric tanks to UL 142 specification for above ground, flammable liquid storage tanks. - Tank design by Agri Process Innovations (API) as part of the biodiesel plant design. See drawing in Document Link - 10 tanks total: One tank is not insulated and stored methanol. The other 9 tanks stored vegetable oil feedstock or B100 biodiesel. - 9 tanks have insulation, side entering agitator, and side entering immersion heater. They are insulated with aluminum cladding and have a side entering Chromalox electric unitary immersion heater and a ProChem side entering agitator. Chromalox heater is 6 KW 480v 3/60. Catalog number RST0X-10806XX, part number 157-122216-082. Shipping dimensions are approx 12.5 ft x 12.5 ft x 38 ft long. Approx weight on non-insulated tank is 15,000 pounds. Approx weight of each insulated tank is 22,000 pounds. We have priced for the LOT of 10 but are open to selling in smaller quantities.

Vertical Tank 20,000 gallon

Asset ID: 2082

Available: 2

Insulated fiberglass vertical tank, Size 12 ft dia x 23 ft seam to seam with dish bottom for capacity of 20,219 gallons. Flat top/dome bottom, side entering manhole. On 52 inch legs for 27'-10" OAH. Atmospheric tank designed for grease/ethanol/water service. Resin material: Liner: Isophthalic, Structural: Orthophthalic. Insulation is 2" foam around sides, bottom dome and top. These tanks were bought new for a project - never used. See drawing. Qty (2) - priced separately.

Vertical Tanks 30,000 Gallon

Asset ID: 2365

Available: 16

Vertical carbon steel tanks 30,000 gallon capacity. Approx size 11'-9" diameter x 37'-7" tall. Flat bottom, slight sloped top. Most if not all of these tanks are designed by Agri Process Innovations and built by SteelTank in conjunction with a biodiesel plant and held biodiesel or glycerin. See the drawing in Document Link - final dimensions would have to be verified on purchase. There are 16 tanks as described below. Priced separately. Allow 2 to 4 weeks for removal and loading - Vertical Tanks - Quantity (5): not insulated, flat bottom, slightly sloped top, side manhole. - Vertical Tanks - Quantity (3): not insulated but they have angle iron clips installed for insulation, flat bottom, slightly sloped top, manhole on side - Vertical Tanks - Quantity (8): Insulated with aluminum sheathing, flat bottom, slightly sloped top, manhole on side

Vertical Tanks 27,350 Gallon

Asset ID: 2366

Available: 2

Vertical carbon steel tanks 27,350 gallon capacity. Insulated, On legs - Approx size 11'-9" diameter x 31' s/s on approx 3 ft legs for OAH approx 36 ft. Dish bottom, dish top. Service has been biodiesel B100. Final dimensions would have to be verified on purchase. Quantity (2) tanks - priced separately. Allow 2 to 4 weeks for removal and loading

Vertical Tank 12,000 gallon (3)

Asset ID: 8246

Available: 3

Vertical carbon steel tank, flat bottom/top. Nominal 12,000 gallons. Size approx 12 ft dia x 15 ft tall. 12,690 gallon capacity. T-116 is atmospheric. T-113 and T-114 are 15 psig @ 150F. Weight 10,100 pounds. Qty (3) available - priced separately.

Mix Tank 4500 gallon

Asset ID: T-408

Available: 1

### Mix Tank With Agitator ### Vertical mix tank. Carbon steel on legs. Size approx. 8 ft dia x 12 ft high for about 4,500 gallons on 2 ft legs. OAH approx. 17 feet. Atmospheric tank - no pressure rating. Built by Lowe-Mar Mfg. Co. Serial number 95039-2. Top entering agitator with 2 triple blade sets. Philadelphia agitator. See Asset T-508 for second identical tank

Mix Tank 4500 gallon

Asset ID: T-508

Available: 1

### Mix Tank With Agitator ### Vertical mix tank. Carbon steel on legs. Size approx. 8 ft dia x 12 ft high for about 4,500 gallons on 2 ft legs. OAH approx. 17 feet. Atmospheric tank - no pressure rating. Built by Lowe-Mar Mfg. Co. Serial number 95039-1. Top entering agitator with 2 triple blade sets. Philadelphia agitator. See Asset T-408 for second identical tank

Vertical Fiberglass Tank

Asset ID: X2001

Available: 1

Vertical fiberglass tank, flat bottom/top, side entering manhole designed for atmospheric pressure. Designed for sodium silicate solution at specific gravity 1.5. Last used for HCL (hydrochloric acid)

Vertical Tank, Insulated

Asset ID: X2002

Available: 1

Vertical carbon steel tank, insulated. Flat bottom. Last used as Glycerin Tank South

Vertical Tank, Insulated

Asset ID: X2003

Available: 1

Vertical carbon steel tank, insulated. Flat bottom. Last used as Glycerin Tank North

Cone Bottom Tank, Insulated

Asset ID: X2004

Available: 1

Vertical carbin steel tank on legs, insulated. Slight cone bottom. Side entering manhole. Last used as Glycerin Still South

Cone Bottom Tank, Insulated

Asset ID: X2005

Available: 1

Vertical carbin steel tank on legs, insulated. Slight cone bottom. Side entering manhole. Last used as Glycerin Still North

Knock Out Pot, FFA

Asset ID: X2006

Available: 1

Knock Out Pot for FFA (free fatty acid)

Horizontal Tank

Asset ID: X2008

Available: 1

Horizontal carbon steel tank, slight dish ends. Side and end manholes. Glycerin Settler 221

Seal Pot

Asset ID: X2011

Available: 1

Seal Pot

Small Vertical Tank

Asset ID: X2014

Available: 1

Meth Oxide buffer tank

Air Receiver

Asset ID: X2033

Available: 1

Air receiver pressure tank,carbon steel mfg by SteelFab. ASME NB # 864101 MAWP 165 psig at 400F. Also certified canadian CRN. Last certified 2018. Used as East Receiver.

Air Reciever

Asset ID: X2034

Available: 1

Air receiver tank. ASME MAWP 165 psig. West Receiver.

Condensate Receiver

Asset ID: X2042

Available: 1

Condensate receiver. Located Next to Control Room

Horizontal Tank

Asset ID: X2044

Available: 1

Horizontal carbon steel tank, insulated - used as a biodiesel settler tank,

Vertical Tank

Asset ID: X2045

Available: 1

Vertical carbon steel tank on legs. Approx size 2 ft dia x 4 ft tall - capacity. Measurements must be verified. Located Next to Settler

Knockout Pot

Asset ID: X2055

Available: 1

Vertical carbon steel knock out pot.

Vertical Pressure Tank

Asset ID: X2061

Available: 1

Vertical carbon steel pressure tank used as VLF Break Tank

Water Seperator Tank

Asset ID: X2063

Available: 1

Water separator tank, carbon steel rectangular. Open top

Hydrasep Oil/Water Separator

Asset ID: X2064

Available: 1

Hydrasep Oil/Water Separator. Horizontal, carbon steel, insulated. Hydrasep 1

Hydrasep Oil/Water Separator

Asset ID: X2066

Available: 1

Hydrasep Oil/Water Separator. Horizontal, carbon steel, insulated. Serial number 5000119. Volume 1,184 gallons. Atmospheric pressure. Hydrasep 2

Vertical Tank

Asset ID: X2068

Available: 1

Vertical carbon steel tank, on legs, insulated. Top entering agitator. Used as Wash Tank North

Vertical Tank

Asset ID: X2069

Available: 1

Vertical carbon steel tank, on legs, insulated. Top entering agitator. Used as Wash Tank South

Vertical Tank, ss

Asset ID: X2070

Available: 1

Columbian TecTank vertical stainless steel tank, on legs. Cone bottom, side entering manhole. Approx size 5 ft dia x 13'-3" tall for capacity 1946 gallons. Used as SS Tank South of Water Tanks Feeds HydraSep 2

Slurry Tank

Asset ID: X2073

Available: 1

Slurry Mix Tank. Vertical carbon steel tank on legs. Usewd as precoat tank for filter presses.

Slurry Tank

Asset ID: X2075

Available: 1

Slurry Tank, vertical carbon steel tank used as slurry tank for filter press.

Vertical Tank

Asset ID: X2078

Available: 1

Vertical carbon steel tank on legs, top entering agitator. Used as RDO Tank

Horizontal Tank

Asset ID: X2080

Available: 1

Horizontal carbon steel tank, insulated. Used as Settling Tank 2

Horizontal Tank

Asset ID: X2081

Available: 1

Horizontal carbon steel tank, insulated. Used as Settling Tank 1

Vacuum Pressure Tank

Asset ID: X2087

Available: 1

Vertical carbon steel pressure tank (vacuum) used as oil dryer

Vertical Tanks

Asset ID: X2090

Available: 2

Vertical carbon steel tanks, on legs. Biodiesel process tanks - crude tanks. Qty (2) - priced separately

Air Receiver

Asset ID: X2108

Available: 1

Air receiver pressure tank,carbon steel mfg by SteelFab. ASME NB # 864105 MAWP 165 psig at 400F. Also certified canadian CRN. Last certified 2018. Used as West Receiver.

Horizontal Tank, ss

Asset ID: 2049

Available: 1

Horizontal stainless steel tank, on saddles. Size 67" dia x 94" long for capacity of 1,800 gallons.

190 Proof Receiver

Asset ID: VS-4206

Available: 1

Vertical tank mfg by WINBCO sn 11596. Stainless ss304. Size approx 9'-6" ID x 12' s/s, On skirt. ASME Nat'l Bd 735, MAWP Rated at -15 psig external pressure and 50 psig internal pressure at 300 F. Insulated. Material SA-240-304.Nominal capacity 7400 gallons (7,465 full). Used as 190 Proof Receiver. Still installed, removal extra

Beer Well Tank

Asset ID: TK-3108

Available: 1

Vertical tank SS304 rated at 2.5 psig at 200F. Size is 59' dia x 48' for a capacity of approx 883504 gallons. Sloped bottom, top entering agitator. Material is SS304 Used as Beer Well Tank sn07235. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Vertical Tank, ss

Asset ID: TK-7601

Available: 1

Vertical tank API 650 stainless steel 304 insulated with 3" fiberglass. Rated at 0.25 psig at 300F. Size is 32'-3" dia x 40' for a capacity of approx 244,422 gallons (nominal 219,980 gallons). Sloped bottom, insulated. SN 07249, Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know. Used as Process Condensate Tank. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Thin Stillage Collection Tank

Asset ID: TK-5101

Available: 1

Vertical tank SS304 rated at 2.5 psig at 300F. Size is 12' dia x 8' tall for a capacity of approx 4400 gallons. Material is SS304. Flat bottom, dome top, insulated with 3 inch mineral wool, 24" side entering manhole. Used as Thin Stillage Collection Tank sn GI140048.

Steam Drum

Asset ID: 41-V-180

Available: 1

Steam drum by Nebraska Boiler, built 2009. Horizontal, ASME Nat'l Bd# 877, MAWP 800 psig/FV at 350F, Stainless steel SA-312-304. Physical size 42" dia x 120" s/s x 0.5" shell (11'-3" OAL) for 107cf or 720 gallons. Used as Catalytic Converter steam drum. Part of Catalytic Converter module FP411

Flash Tank

Asset ID: TK-2304

Available: 1

Vertical tank stainless 304 rated at Full vacuum psig at 212F. Size is 6' ID x 9' s/s for a capacity of approx 1834 gallons. Insulated, Dome top, dome bottom, on cs skirt 7 ft tall. OAH = 17 ft 8 in. Has baffle and vortex breaker. 24" flanged manway, 10" inlet, 16" vapor outlet, 12" discharge. Material is SS304, sn11595 Used as CO2 Flash Tank.

Steam Blowdown Drum

Asset ID: 41-V-630

Available: 1

Steam drum manufactured by Precision Pipe & Vessel in 2009. ASME MAWP 150 psig/FV at 550F, Nat'l Bd# 893, s/n CV-0893. Material is SA312-TP347. Physical size is 24"dia x 8'-6" s/s, OAH 11'-10" for capacity of 185 gallons. Used as a steam blowdown drum

Knock Out Pot

Asset ID: VS-3201

Available: 1

Vent Gas Knock-out pot mfg by Jogler. Rated at FV psig external pressure and 50 psig internal pressure at 150 F. Material 304/L SS. Used as vent gas knock out pot. Sn1802268. Part of complete package including blower, pump, structural, see asset PK-3201. For a list of components, enter pk3201 in search on web site.

Slurry Tank, Powder

Asset ID: TK-10

Available: 1

Cellulose Dispenser. Vertical carbon steel tank, agitated. Size 60" dia x 108" s/s with 28" legs. Capacity is approx 1300 gallons. Agitator is 36" higher than tank. OAH = 108+28+36. Flat top with half tank hinged cover, dish bottom. Includes radiator for hydraulic line cooling of gear reducer. Agitator gearmotor is SEW RM107/A 01/715687601.0001.14. rpm 1782 in/362 out. Has Endress Hauser level transmitter. Agitator has one set of 4-blades at bottom. Was used as cellulose dispensing tank, can be used as slurry tank. Has 4" flanged outlet. Tank has side opening door.

Slurry Mix Tank

Asset ID: AF6

Available: 1

Mixing Tank. Vertical agitated carbon steel tank, insulated. Size approx 28" dia x 70" tall on 16" legs. Agitator is approx 3.5 ft above top of tank. OAH is approx 10.5 ft. Open top, flat bottom. 125 gallon tank. Top entering agitator is 30 HP with one set of blades. Can be used as liquid or powder mix slurry tank

Fermenter Vertical Tank 2

Asset ID: TK-3105

Available: 1

Vertical tank SS304 rated at 2.5 psig at 200F. Size is 51'-9" dia x 48' for a capacity of approx 641950 gallons. Material is SS304. Tank is too large to move but we can cut it up and load on trucks for you - to re-assemble at your place. Used as Ferm 2 Tank sn07232. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Slurry Tank ss

Asset ID: 7450

Available: 1

1,000 gallon 304 SS slurry tank. Built 1992 by Sylacauga Tank Corp. SN #7088, atmos. Service. Three tier turbine 304 ss agitator and side mounted baffles. Vessel has a flat top, and dish bottom and mounts vertically by lugs. Diameter is 64" x 74 " straight side. Shell and bottom thickness is 0.188", Dish radius is 57, head thickness is 0.313". Tank has a 2" center bottom outlet and a 2.5" weld neck outlet at the top of the side for overflow. Top Openings include the following: Two 8" weld neck flanges, Two 2" flanges, One 3" flange, Three connections, flanged form 1" through 1 & 3/4". Vessel also has an eight inch opening with a product screen,(4x4) and an access door18" x 24" with hinges. Agitator drive is by Lightnin, Model 74C, 7.5, 31-1 drive ratio, 56 rpm output shaft, 7.5 hp motor, Mixer features a reliance motor 1775 rpm, 7.5 hp, 3 phase, 60 hz, 460 v.

Sulfur Guard Bed Vessel

Asset ID: 41-V-196

Available: 1

Sulfur guard bed vertical vessel. ASME Nat'l Bd 897, MAWP 1650 at 550F, s/n CV-0891 . Mfg by Precision Pipe & Vessel in 2009 - used only 42 days - like new. Material is carbon steel SA-516 70N. Physical size is 4' dia x 14'-4" s/s, approx 23 ft OAH for a capacity of 1410 gallons. Loaded with Haldor Topsoe HTZ-4 sulphur absorption catalyst.

Vertical Tank

Asset ID: TK-2503

Available: 1

Vertical tank atmospheric tank. Material is ss304, volume 500 gallons. Insulated, on legs. Size 36" OD x 120" seam-seam with slight cone bottom and top. On 44 3/8" legs for 175 9/16" OAH. Has 3 inets 8", 6" 4", one outlet 8", and a 10" vent. Sn GI150010. Used as 3rd Pass Collection Tank. We have drawing - access in Links.

Vertical Tank 8300 gallon

Asset ID: 8324

Available: 1

Carbon steel vertical atmospheric tank. Flat bottom/top, size approx 7 ft 9 in diameter x 23 ft 8 in tall. 8,350 gal capacity. Was used as Glycerin Storage Weight approx 8300 pounds. Tank. T-207

Horizontal Decanting Vessel

Asset ID: V-1506

Available: 1

Horizontal carbon steel pressure vessel. Decanter and Liquid Knock Out. Built by Confab s/n 64866. ASME Nat'l Bd# 28, rated at 184 psig at 350F (1269 kpa at 177C). Approx size 6.5 ft dia x 18 ft long T/T for 4,468 gallon capacity. Weight: Approx. 12000-15000 lbs. Last used as Decanter in ethanol plant - see schematic link. Insulation has been removed. Price includes removal and loading - ready now to load

Oil Separator Tank ss

Asset ID: VS-4204

Available: 1

Vertical stainless steel tank mfg by SpecFab. Size 14" dia x 5 ft s/s for capacity of approx 55 gallons. ASME NB# 72 MAWP 205 psig at 300F. Mfg sn 90. Material SA-312-TP304. See drawing and data sheet in Links. Used as Fusel Oil Separator.

Slurry Tank

Asset ID: TK-40

Available: 1

Homogenizer. Slurry tank. Agitated vertical carbon steel tank on legs. Size 38" dia x 6 ft s/s with 21" legs. Capacity approx 340 gallons. Open top/dish bottom. Agitator is top entering and is 36 inches higher than tank top. OAH approx 10.75 ft. Agitator has two sets of 2-blade propellers at mid and at bottom. Motor 5HP. Can be used as liquid or powder slurry tank.

Vertical Tank 3800 gallon

Asset ID: 8324-2

Available: 1

Carbon Steel Tank, vertical. Size 6 feet diameter x 18 feet tall. 3800 gallon capacity approx. Was used as Active Filtration Tanks. Atmospheric. Weight approx 5,000 pounds. T-308

Fermenter Vertical Tank 3

Asset ID: TK-3106

Available: 1

Vertical tank SS304 rated at 2.5 psig at 200F. Size is 51'-9" dia x 48' for a capacity of approx 641950 gallons. Material is SS304. Tank is too large to move but we can cut it up and load on trucks for you - to re-assemble at your place. Used as Ferm 3 Tank sn07233. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Vertical Tank, cs

Asset ID: TK-7704

Available: 1

Vertical tank API 650 carbon steel, rated at 0.5 psig at 200F. Size is 14'-11" dia x 28'-8" for a capacity of approx 37,475 gallons (36,930 nominal). Atmospheric tank. Flat bottom, cone top, vertical ladder and handrail at top, side manhole. Ser num 07-4558. Used as ammonia Tank.

Vertical Tank

Asset ID: TK-2801

Available: 1

Vertical tank API 650 rated at 1 psi at 300F. Size 6 ft dia x 14 ft tall s/s for capacity of 3,070 gallons/2754 nominal. Dish top/bottom. Material is SS304. Gilbert Industries sn 140053. On legs, insulated with 2" mineral wool and sheathing. Has 24" side entering manway, (3) inlets 1"/2"/2", discharge 4", pressure relief 2". Used as Polisher feed tank. Part of FluidQuip BSS system (See asset FQ-BOS) . Still installed on RTO.

Vertical Tank, ss cone bottom

Asset ID: 2061

Available: 1

Stainless steel vertical tank - size 50" dia x 84" tall on legs for 117" OAH. Capavcity 580 gallons. Flat top, Cone bottom approx 45 degrees. On legs.

Yeast Prop Tank

Asset ID: TK-3102

Available: 1

Vertical tank stainless steel 304, API 650. MAWP rated at 2.5 psig at 300F. sn 07244 Tank was 48 ft tall but modified in 2009 to remove some rings and add a cone bottom internal. New size is 22'-6" dia x 26'-5.5" tall for a capacity of approx 78,914 gallons. Flat top, cone bottom inside the sloped bottom. Has vertical ladder and 360 degree handrail on top. Used as Yeast Prop Tank. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Vertical Tank, ss

Asset ID: TK-7602

Available: 1

Vertical tank API 650 stainless steel 304, rated at 0.25 psig at 300F. Sloped bottom, 15 degree cone top, i3" insulation. No agitator. Size is 20'-3" dia x 24' for a capacity of approx 57,821 gallon (nominal 1328 bbl 55,776 gallons) sn 07250. Includes ladders. Shell thickness 3/16". Has 24" manway on side, 20" hatch on top, Used as Dilute Caustic Tank. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Vertical Tank

Asset ID: TK-5104

Available: 1

Vertical tank API 650 stainless steel 304. MAWP rated at 2.5 psig at 300F. Size is 23'-3" dia x 38' for a capacity of approx 108,616 gallons. Sloped bottom, cone top, insulated, vertical ladder. Used as Syrup Tank sn 07247. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Air Receiver Pressure Tank 200 Gallons

Asset ID: AF1

Available: 1

Air receiver by Manchester Tank. Vertical on base. Size 28" dia x 55: s/s on base for 78" OAH. Capacity 200 gallons. ASME Nat'l Bd # 270535 MAWP 300 psi at 400F. Also CRN certified.

Vertical Tank, ss

Asset ID: 2062

Available: 1

Stainless steel ss304 vertical tank. Size 52.5" dia x 70.5" tall. Flat top, slight cone bottom. Capacity 600 gallons. Has short legs 6".

Fermenter Vertical Tank 1

Asset ID: TK-3104

Available: 1

Vertical tank SS304 rated at 2.5 psig at 200F. Size is 51'-9" dia x 48' for a capacity of approx 641950 gallons. Material is SS304. Tank is too large to move but we can cut it up and load on trucks for you - to re-assemble at your place. Used as Ferm 1 Tank sn07231. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Caustic Tank

Asset ID: TK-7701

Available: 1

Vertical tank carbon steel insulated. API 650 rated at 0.5 psig at 300F. Size is 9'-6" dia x 19' for a capacity of approx 10,030 gallons (9,810 nominal). Sn 07-4557. Used as Caustic Tank.

Chilled Water Return Tank

Asset ID: TK-7103

Available: 1

Vertical tank API 650 CS atmospheric tank rated at 2.5 psig at 200F. Size is 9'-6" dia x 18'-11" for a capacity of approx 10,000 gallons. sn 07-4556. Cone top, flat bottom. With ladder and 16" vent, side entering 24" manhole. Material is CS. Used as Chilled Water Return Tank. See link for drawing.

Vertical Tank, ss

Asset ID: 2050

Available: 1

Vertical stainless steel tank, insulated. Size 30.5" dia x 45" tall on legs for 76" OAH. Capacity 145 gallons.

Slurry Mix Tank

Asset ID: TK-2101

Available: 1

Vertical tank stainless API-650 rated at 2.5 psig at 190F. Size is 14' ID x 32' s/s, with top OAH = 35.25 ft tall for a capacity of approx 38400 gallons. Sloped bottom, Cone top. Insulated, side entering manhole, ladder Material is ss 304 insulated. Atmospheric. Has top entering agitator, Lightnin Model 780C150 with angle drive 150 HP motor 1750 rpm 460/3/60. Agitator gearbox is 17.4:1 for mixer rpm = 100 rpm. Mount is 20 inch flange, 5" shaft ss316) 422" long from flange to steady bearing. Has 3 sets of propellers with blades 4/3/3. Propeller lengths 63"/56". Used as Slurry Mix Tank sn 07-4551. We have drawing of agitator - see LINKS.

Vertical Tank 3800 gallon

Asset ID: 8324-3

Available: 1

Carbon Steel Tank, vertical. Size 6 feet diameter x 18 feet tall. 3800 gallon capacity approx. Was used as Active Filtration Tanks. Atmospheric. Weight approx 5,000 poundsT-309

Vertical Tank

Asset ID: TK-5102

Available: 1

Vertical tank stainless steel 304 AP 650I rated. MAWP at 0.25 psig at 300F. Size is 28'-6" dia x 38' for a nominal capacity of approx 4317 bbl (181,314 gallons). Sloped bottom, insulated with 3" mineral wool & aluminum sheathing. Has vertical ladder and 360 degree top handrail. Manufactured by Baker sn 07245. Used as Whole Stillage Tank

Liquefaction Tank

Asset ID: TK-2201

Available: 1

Vertical tank SS304 rated at 2.5 psig at 190F. Size is 24-9 dia x 48' tall for a capacity of approx 155,473 gallons. Material is SS304. Insulated, sloped bottom. Includes vertical ladder and handrails around on top. Has top entering Ligntnin agitator with angle drive gearbox. Lightnin model 77C30 driven by 30HP motor 1200 rpm 460/60/3. Gearbox output is 38.5 rpm. Shaft and blades ss304/ss316. Has 3 sets of 3 propellers and a steady bearing. Distance from 18" flange to steady bearing is 615 inches. Used as Liquefaction Tank sn 07243.

Vertical Tank, ss

Asset ID: TK-7901

Available: 1

Vertical tank API 650 stainless steel 304L rated at 0.25 psig at 200F. Size is 30' dia x 30' for a capacity of approx 158,630 gallons (nominal 150,000 gallons). Spiral stairs, top handrail. Ser num 142724. Used as Reclaim Tank. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Vertical Tank ss

Asset ID: TK-5103

Available: 1

Vertical tank API 650. Stainless steel 304 rated at 2.5 psig at 300F. Sn 07246. Size is 24'-6" dia ID x 38' for a capacity of approx nominal capacity 3190 bbl (130,578 gallons). Shell thickness 3/16". Sloped bottom, 15 degree cone top, Insulated. 24" side manway, 20" top hatch, 6" inlet/outlet. Includes top entering agitator on 12" flange, ladders. Agitator (AG-5103) is Lightnin Model 74 C 7.5 right anglr drive with a 7.5HP motor. Mixer speed 37.7 rpm. Mixer shaft 3" stainless with one set of 3 blades sweeping 87" with steady bearing. Motor is WEG 7.5 HP 1170 rpm 460/3/60 TEFC frame 254T. See tank and agitator drawing in Links. Used as Thin Stillage Tank. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Square Tank, ss

Asset ID: 2048

Available: 1

Square stainless steel tank,reinforced sides. Size is 111" x 111" x 160" high - on legs for OAH 220". Atmospheric tank. Capacity approx 8500 gallons. Material ss304. Used for pure ethanol storage food grade. Part of an entire CBD extraction system - enter PK6020 to see all components.

Condensate Receiver

Asset ID: VS-4205

Available: 1

Vertical condensate tank on legs mfg by Wheeler tank sn 11746. ASME NB # 15765 MAWP 150 psig at 450F.

Soft Water Tank

Asset ID: TK-7301

Available: 1

Carbon steel vertical tank, approx size 15 ft dia x 23'-10" tall for a capacity of 750 bbl (31,500) gallons. Material SA-36 coated 100%. Includes vertical ladder and platform at top, handrails 360 degree. Side manhole, flat bottom. Built 2016 - idled 2019. Weight empty approx 18,085 pounds. Last used as a soft water tank in boiler area. Part of boiler feedwater system PK-1111 but can be sold separately

Condensate Flash Tank

Asset ID: VS-7201

Available: 1

Steam Condensate Flash Receiver mfg by SpecFab. Sn 93x. ASME MAWP 150 psig internal pressure/FV at 400 F. Material carbon steel SA-516-70. Physical size 59" ID x 11' 4" s/s x 0.375 thk. On 5 ft 10" legs. Approx 19 ft 6 in OAH. Insulation 3 inches. Approx capacity 1,937 gallons. Used as Steam Condensate Flash Receiver.

Knock Out Pot

Asset ID: ME-3203

Available: 1

Knock out pot Mfg by SpecFab, vertical stainless steel. MAWP 14 psig, Serial number 101. Used as a knock out pot to protect blower BL-3202 CO2 scrubber system. Still installed.

Vertical Tank

Asset ID: TK-5109

Available: 1

Vertical ss tank, insulated, on legs. Gilbert sn G1150011. Atmospheric tank rated at 0.36 psi at 180F. Dimensions unknown - capacity unknown. Material ss304. Used as Thin Stillage Screen Tank. Still installed, removal extra.

Horizontal tank

Asset ID: T-7

Available: 1

Horizontal carbon steel tank with internal weir wall, insulated on saddles. Approx size 3.5 ft dia x 26 ft long for capacity 1880 gallons. Used as First Pass Decanter Tank with Weir Wall for separation of Glycerin. Part of Biodiesel Plant PK-1800

Fermenter Vertical Tank 4

Asset ID: TK-3107

Available: 1

Vertical tank SS304 rated at 2.5 psig at 200F. Size is 51'-9" dia x 48' for a capacity of approx 641950 gallons. Material is SS304. Tank is too large to move but we can cut it up and load on trucks for you - to re-assemble at your place. Used as Ferm 4 Tank sn07234. Sold As Is Where Is but it is too big to move - we can provide quote to cut up and move, reinstall if necessary. Price depends on the scope. Let us know.

Horizontal Tank with Weir

Asset ID: T-107

Available: 1

Horizontal carbon steel tank, insulated on cradles. Include internal weir. Size approx 3.5 ft dia x 26 ft for 1880 gallons. Used as Decanting tank with weir wall for separation, Part of Biodiesel Plant PK-1800 -

Powder Mix Tank

Asset ID: TK-22

Available: 1

Universal Mixer. Vertical Powder mixing vessel with 2HP top entering agitator and side door. Number 10-066-109, type 2619.000. Mfg 2014. Size 6 ft dia x 7 ft tall seam to seam, approx 1500 gallons. Flat top, dish bottom. Top entering agitator with one set of 4-blades at bottom. Agitator gear box has cooler heat exchanger on oil, recirculated. Side lug mounts. Gasketed door on side. Mfg by Wehrhahn

Vertical Pressure Tank ss

Asset ID: 7452

Available: 1

5,562 Gallon, 304SS vertical pressure tank, Manufactured by Union Carbide, National Board number 2650, Serial Number 906013, rated 90 psi @ 0 to 300 degrees F. 96" OD x 14' straight side, welded dished heads, .406" shell thickness, .526" head thickness, with wire mesh pad in bottom head of tank. Openings include: Top - (1) 18" with bolted cover, (1) 2", (1) 6", (1) 1", (1) 3"; Side - (2) 18" manways with bolted covers; (1) 6" center bottom outlet. Mounted on 4 legs. Total Weight 15,500#

Flash Tank Drum

Asset ID: 31-V-156

Available: 1

Steam Flash Drum to atmospheric. Manufactured by Precision Pipe & Vessel in 2009. ASME rated MAWP 150/FV T 250F. Material carbon steel. Part of Absorber & cleanup module FP311

Include all

Include all

Include all

Include all

Include all

Include all

Include all

All Assets from Category 'Tanks & pressure vessels'

89 Results

Sort:

Relevance

Refine Assets By

Include all

Include all

Include all

Include all

Include all

Include all

Include all

Asset ID: 1966

Available: 5

Vertical Tanks ss

Asset ID: 1997

Available: 1

Vertical Tank 29,000 gallon

Asset ID: 2082

Available: 2

Vertical Tank 20,000 gallon

Asset ID: 2365

Available: 16

Vertical Tanks 30,000 Gallon

Asset ID: 2366

Available: 2

Vertical Tanks 27,350 Gallon

Asset ID: 8246

Available: 3

Vertical Tank 12,000 gallon (3)

Asset ID: T-408

Available: 1

Mix Tank 4500 gallon

Asset ID: T-508

Available: 1

Mix Tank 4500 gallon

Asset ID: X2001

Available: 1

Vertical Fiberglass Tank

Asset ID: X2002

Available: 1

Vertical Tank, Insulated

Asset ID: X2003

Available: 1

Vertical Tank, Insulated

Asset ID: X2004

Available: 1

Cone Bottom Tank, Insulated

Asset ID: X2005

Available: 1

Cone Bottom Tank, Insulated

Asset ID: X2006

Available: 1

Knock Out Pot, FFA

Asset ID: X2008

Available: 1

Horizontal Tank

Asset ID: X2011

Available: 1

Seal Pot

Asset ID: X2014

Available: 1

Small Vertical Tank

Asset ID: X2033

Available: 1

Air Receiver

Asset ID: X2034

Available: 1

Air Reciever

Asset ID: X2042

Available: 1

Condensate Receiver

Asset ID: X2044