Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Process'
27 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
Exhaust Hood
Asset ID: E2364
Available: 1
Exhaust hood Dimensions: 76"W x 61"D galvanized
Asset ID: E2364
Available: 1
Exhaust Hood
Exhaust hood Dimensions: 76"W x 61"D galvanized
Exhaust hood
Asset ID: E2366
Available: 1
Exhaust hood 72"W x 56"D galvanized
Asset ID: E2366
Available: 1
Exhaust hood
Exhaust hood 72"W x 56"D galvanized
Flare
Asset ID: ME-4571
Available: 1
Methanator flare fed by 1/2" natural gas line. Located on top of methanator bldg.
Asset ID: ME-4571
Available: 1
Flare
Methanator flare fed by 1/2" natural gas line. Located on top of methanator bldg.
Disintegrator
Asset ID: X-5210
Available: 1
Disintegrator. Size 84" dia x 42" wide cold disintegrator. Beater section 3' 6" wide x 84" dia. Overall dimensions 10' 6" length x V-belt drive (5 grooves) by 150 HP motor at 900 rpm for an operating speed of 278 rpm TEFC frame 449T 460/3/60. See link for drawing.
Asset ID: X-5210
Available: 1
Disintegrator
Disintegrator. Size 84" dia x 42" wide cold disintegrator. Beater section 3' 6" wide x 84" dia. Overall dimensions 10' 6" length x V-belt drive (5 grooves) by 150 HP motor at 900 rpm for an operating speed of 278 rpm TEFC frame 449T 460/3/60. See link for drawing.
Condensate Package
Asset ID: Z-4101
Available: 1
Condensate collection package. Includes Wheeler tank vertical and Goulds condensate pump (see asset PC-4101) 3x4-10 pump/motor/bedplate. Mfg by Campbell Sevey sn 4872-B ASME NB # 12171 MAWP 150 psig at 450F. Used as Beer column condensate collection package. Physical size of skid is approx 4' W x 9'8" L x 12-'8" Tall. Estimated total weight 3,000 lbs. If take tank off for shipping, Tank would be 3' W x 12'-5" L x 4' Tall and Skid would be 4'W x 9'8"L x 7'4" Tall.
Asset ID: Z-4101
Available: 1
Condensate Package
Condensate collection package. Includes Wheeler tank vertical and Goulds condensate pump (see asset PC-4101) 3x4-10 pump/motor/bedplate. Mfg by Campbell Sevey sn 4872-B ASME NB # 12171 MAWP 150 psig at 450F. Used as Beer column condensate collection package....
Wet Scrubber, Chemical
Asset ID: FB-51
Available: 1
Acid scrubber. Chemical scrubber, vertical, Sits on reservoir 34" x 60" rectangular with pump. Scrubber is 2 ft dia x 15 ft tall. Designed for vacuum. Mfg is Viron International, Model VCA-36-FRP-0.3-36 Carbon. Serial 13352. Designed for 300 cfm. Has EchoSpan level indicator transmitter and FRP mist eliminator pad at packing depth 28"
Asset ID: FB-51
Available: 1
Wet Scrubber, Chemical
Acid scrubber. Chemical scrubber, vertical, Sits on reservoir 34" x 60" rectangular with pump. Scrubber is 2 ft dia x 15 ft tall. Designed for vacuum. Mfg is Viron International, Model VCA-36-FRP-0.3-36 Carbon. Serial 13352. Designed for 300 cfm....
Shredder
Asset ID: 2352
Available: 1
Shredder - Plant Muncher by High Yield Solutions cannabis waste shredder - used for hemp processing and other plant products.
- Used very little - has 85 hours on it. In excellent shape and operational when idled.
- Motor: 15 HP,460v 3ph 60hz
- Drive Configuration: Inline, Direct Drive
- Cutting Chamber: 15" W X 15" L
- Shred Width: 5/16" Nominal
- Cutters: Constructed Of Hardened, High Strength Alloy Material
- Shaft: Heat Treated Hexagonal, High Strength Alloy Material
- Hopper: Standard
- Stand: Standard
- Finish: Powder Coat #5015 Sky Blue
- Control Package Includes: Push/pull E-stop, Lockable Disconnect, On/off Push Button, Overload Protection
Also available is a discharge Conveyor for additional. See our Asset number 2359
Asset ID: 2352
Available: 1
Shredder
Shredder - Plant Muncher by High Yield Solutions cannabis waste shredder - used for hemp processing and other plant products. - Used very little - has 85 hours on it. In excellent shape and operational when idled....
Powder Feed Hopper Feeder
Asset ID: X2027
Available: 1
Flexicon stainless steel powder feeder hopper with 1/2 HP motor driven screw auger discharge at approx 45 degree., Vibrator. serial number 99965.
Asset ID: X2027
Available: 1
Powder Feed Hopper Feeder
Flexicon stainless steel powder feeder hopper with 1/2 HP motor driven screw auger discharge at approx 45 degree., Vibrator. serial number 99965.
Spares - Valves/Meters/Instruments
Asset ID: X2040
Available: 1
Spare parts in storage. Representative pieces shown here. See photos 503 through 556.
Asset ID: X2040
Available: 1
Spares - Valves/Meters/Instruments
Spare parts in storage. Representative pieces shown here. See photos 503 through 556.
Scrubber
Asset ID: X2050
Available: 1
Scrubber
Asset ID: X2050
Available: 1
Scrubber
Scrubber
Primary Transesterification Skid
Asset ID: X2083
Available: 1
Reactor skid for transesterification of oil for biodiesel. Primary skid.
Asset ID: X2083
Available: 1
Primary Transesterification Skid
Reactor skid for transesterification of oil for biodiesel. Primary skid.
Secondary Transesterification Skid
Asset ID: X2084
Available: 1
Reactor skid for transesterification of oil for biodiesel. Secondary skid.
Asset ID: X2084
Available: 1
Secondary Transesterification Skid
Reactor skid for transesterification of oil for biodiesel. Secondary skid.
3rd Stage Transesterification Skid
Asset ID: X2085
Available: 1
Reactor skid for transesterification of oil for biodiesel. Tertiary skid.
Asset ID: X2085
Available: 1
3rd Stage Transesterification Skid
Reactor skid for transesterification of oil for biodiesel. Tertiary skid.
Reactor
Asset ID: AF4
Available: 1
Reactor vessel. Stainless steel reactor. Material assumed to be ss304. Custom reactor for particle production with gas feeds site ports, instrument ports. Dwyer differential pressure transmitter. Stir/agitator motor drive for shaft at top, 10HP at 1770 rpm. Reactor size is 34" dia x 98" tall for capacity of 350 gallons Mounted on carbon steel frame. Frame size is 53" x 59" x 157" tall.
Asset ID: AF4
Available: 1
Reactor
Reactor vessel. Stainless steel reactor. Material assumed to be ss304. Custom reactor for particle production with gas feeds site ports, instrument ports. Dwyer differential pressure transmitter. Stir/agitator motor drive for shaft at top, 10HP at 1770 rpm....
Reactor, ss Jacketed
Asset ID: R-1
Available: 1
Stainless steel reactor with top entering agitator, level probe, Steam Jacket. Arranged with side lugs, mounted on legs. Size 4'-8" dia x 5'-10" seam to seam (overall tank height including heads is 100"), for capacity of approx 750 gallons. Legs 41". Material ss394L. Built by Paul Mueller in 1992, serial number P38961-15. ASME Nat'l Bd# 20993 MAWP 38 psig at 200F. Ekato top entering agitator type EM 2060, sn 51421-10. 5 HP motor 1800 rpm with gear reducer for agitator shaft rpm 162 rpm. Has 2-bladed axial flow 27" impeller with bottom 19" impeller. Nameplate missing - Still installed. See U-1 form and drawing in Link.
Asset ID: R-1
Available: 1
Reactor, ss Jacketed
Stainless steel reactor with top entering agitator, level probe, Steam Jacket. Arranged with side lugs, mounted on legs. Size 4'-8" dia x 5'-10" seam to seam (overall tank height including heads is 100"), for capacity of approx 750 gallons. Legs 41". Material ss394L....
Reactor, ss Jacketed
Asset ID: R-2
Available: 1
Stainless steel reactor with top entering agitator, level probe, Has steam jacket. Arranged with side lugs, mounted on legs. Size 4'-8" dia x 5'-10" seam to seam (overall tank height including heads is 100"), for capacity of approx 750 gallons. Legs 41". Material ss394L. Built by Paul Mueller in 1992, serial number P38961-16. ASME Nat'l Bd# 20994 MAWP 38 psig at 200F. Ekato top entering agitator type EM 2060, sn 51421-10. 5 HP motor 1800 rpm with gear reducer for agitator shaft rpm 162 rpm. Has 2-bladed axial flow 27" impeller with bottom 19" impeller. . Nameplate missing - still installed. See U-1 form and drawing in Link.
Asset ID: R-2
Available: 1
Reactor, ss Jacketed
Stainless steel reactor with top entering agitator, level probe, Has steam jacket. Arranged with side lugs, mounted on legs. Size 4'-8" dia x 5'-10" seam to seam (overall tank height including heads is 100"), for capacity of approx 750 gallons. Legs 41". Material ss394L....
Reactor Hydrogenation
Asset ID: 1751
Available: 1
Hydrogenation reactor stainless steel 304. NEW reactor - Volume 20 cu M for a 12.5 MT batch size. (5358 gallons) Cylindrical tank with heating/cooling coils, nozzles for oil, sight glass, hydrogen ports, top mounted agitator. MAWP 90 psig at 500F. OD 2000 mm x height 8000 mm. Shipping dimensions L x W x H are 8000 x 2300 x 2500. Will fit into a 40 ft HC container. NEW reactor so we can design to your needs - lead time 10-12 weeks. FOB India Port Nhava Sheva
Asset ID: 1751
Available: 1
Reactor Hydrogenation
Hydrogenation reactor stainless steel 304. NEW reactor - Volume 20 cu M for a 12.5 MT batch size. (5358 gallons) Cylindrical tank with heating/cooling coils, nozzles for oil, sight glass, hydrogen ports, top mounted agitator. MAWP 90 psig at 500F. OD 2000 mm x height 8000 mm....
Catalytic Converter Reactor
Asset ID: 41-R-168
Available: 1
Catalyst Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009. Size approx 7 ft dia ID x 19'-11" s/s x 31 ft overall height for approximately 7,600 gallons capacity - tube bed approx 17 ft long. Has 1,028 x 1.9" O.D. tubes Sch 80 stainless steel TP304L, shell cs 516-70 4 inch thick. ASME Nat'l Bd# 55, MAWP shell 2250 psig/FV at 650 F. MAWP tubes 1650 psig at 650F. Converter currently loaded with approx 150 cu ft methanol catalyst - Sud Chemie MegaMax 700. Still installed - price does not include removal. Shipping size will be about 12 ft x 12 ft x 35 ft long. Note: we have the complete reactor module as well with all pieces shown in photos plus instruments - see asset ID FP411.
Asset ID: 41-R-168
Available: 1
Catalytic Converter Reactor
Catalyst Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009....
Deodorizer Vessel SS
Asset ID: 7472
Available: 1
### 500 Gallon Deodorizer Vessel Design ###
- **NEW**, not built yet so we can design to your specs.
- Size: 42 in Dia by 7 ft sidewall with dished top and bottom heads
- Rating: Full Vacuum at 500 F. MOC: 304L SS, Coils: 304L SS Sch 80 pipe rated 150 psig at 300 F for Cooling Water with 15 turns Sparger Coil: 304 L with 3 turns and 10 - 1/8" holes facing down
- Nozzles: 2 in Oil Inlet, 2 in Oil Outlet, 1 in Temperature Transmitter, 1 in Pressure Transmitter, 8 in Vacuum, 1 in Sample, 18 in Manhole, 2 in sight glass, 1 in CW in, 1 in CW out, 1 in Steam In, 8 in heater flange
- Supports: 4 Lugs
All vessels are designed and constructed according to the ASME Boiler & Pressure Vessel Code Section VIII Division I, but will NOT be 'U' stamped. In addition, the system and components are designed to facilitate maintenance where required. Delivery: 8 to 12 weeks after final drawing approval. Photo is not actual Deodorizer Vessel - similar item shown for reference only.
Asset ID: 7472
Available: 1
Deodorizer Vessel SS
### 500 Gallon Deodorizer Vessel Design ### - **NEW**, not built yet so we can design to your specs. - Size: 42 in Dia by 7 ft sidewall with dished top and bottom heads - Rating: Full Vacuum at 500 F....
Vacuum System Steam Ejector
Asset ID: 7114
Available: 1
2 Stage steam ejector vacuum system. Gardner Nash Kinema Master Serial number 844042: barometric condenser PY, 1st stage steam ejector Y, intercondenser YZ, and 2nd stage steam ejector Z. Gardner Nash Kinema project #1961499, sales order# 1407528. Last used with a thin film dryer. System removed and ready to load. RD-?
Asset ID: 7114
Available: 1
Vacuum System Steam Ejector
2 Stage steam ejector vacuum system. Gardner Nash Kinema Master Serial number 844042: barometric condenser PY, 1st stage steam ejector Y, intercondenser YZ, and 2nd stage steam ejector Z. Gardner Nash Kinema project #1961499, sales order# 1407528. Last used with a thin film dryer....
Vacuum System Steam Ejector
Asset ID: 7115
Available: 1
2 Stage steam ejector vacuum system. Nash Kinema Master serial # 844402, serial number for the set 9104082. Barometric condenser PY, 1st stage steam ejector Y, intercondenser YZ, 2nd stage steam ejector Z. Missing 2nd stage steam ejector (EJ-0315) but we can order it for you. Used - Last used with a thin film dryer - removed and ready to load. RD-79
Asset ID: 7115
Available: 1
Vacuum System Steam Ejector
2 Stage steam ejector vacuum system. Nash Kinema Master serial # 844402, serial number for the set 9104082. Barometric condenser PY, 1st stage steam ejector Y, intercondenser YZ, 2nd stage steam ejector Z. Missing 2nd stage steam ejector (EJ-0315) but we can order it for you....
Vacuum Eductor Jet Pump
Asset ID: VE-4301
Available: 1
Vacuum eductor Jet Pump using water as motive force pulling vacuum on evap condenser E-4503 to Molecular sieves. Tyco Model ELL6. Water inlet 6"/outlet 6". Vapor inlet to chest is 4". Designed for vapor input of 60.6 scfm at 105F. Material 316 stainless steel. Motive fluid ethanol/water (68%/32%) at 95F, 100 psig. Vacuum suction fluid air, CO2, ethanol & water vapor at 2 psia 60.6 scfm. See spec sheet in Link.
Asset ID: VE-4301
Available: 1
Vacuum Eductor Jet Pump
Vacuum eductor Jet Pump using water as motive force pulling vacuum on evap condenser E-4503 to Molecular sieves. Tyco Model ELL6. Water inlet 6"/outlet 6". Vapor inlet to chest is 4". Designed for vapor input of 60.6 scfm at 105F. Material 316 stainless steel....
Steam Ejectors
Asset ID: B2078
Available: 3
Graham Steam Ejector System 2-stage, Includes 8" Barometric Precondenser water rated FV & 15 psig. SN: 17-14060-1. We count (6) precondensrs, and 5 steam ejectors. Incomplete systems. There should be (3) complete sets there but Buyer will have to inspect. Two skids - priced for the LOT.
Asset ID: B2078
Available: 3
Steam Ejectors
Graham Steam Ejector System 2-stage, Includes 8" Barometric Precondenser water rated FV & 15 psig. SN: 17-14060-1. We count (6) precondensrs, and 5 steam ejectors. Incomplete systems. There should be (3) complete sets there but Buyer will have to inspect. Two skids - priced for the LOT.
Cooling Tower & Pump 60 ton
Asset ID: 2056
Available: 1
CTS cooling tower and recirculating pump. This is a counter flow induced draft FRP water cooling tower. Tower has a 1.5 HP fan and 1HP condenser. The nameplate is worn off but this is most likely a T-260 tower rated at 60 tons. Cooling capacity 900,000 BTU/hr, air volume 14,700 cfm. Tower size approx 78" dia x 74" tall. Water circulating pump is approx 77.5 gpm with a Bell & Gossett size e-1532 size 2BD, pump construction SSF impeller dia 8" serial number C286138-01G91 with a 5HP motor 1800 rpm. This is an end suction close coupled foot mounted pump. See link for pump specs and tower specs (most likely the right model number). Part of Gryphon biomass drying system asset 2042 - NOT sold separately. Part of an entire CBD extraction system - enter PK6020 to see all components.
Asset ID: 2056
Available: 1
Cooling Tower & Pump 60 ton
CTS cooling tower and recirculating pump. This is a counter flow induced draft FRP water cooling tower. Tower has a 1.5 HP fan and 1HP condenser. The nameplate is worn off but this is most likely a T-260 tower rated at 60 tons. Cooling capacity 900,000 BTU/hr, air volume 14,700 cfm....
Cooling Tower 680 ton
Asset ID: 7553
Available: 1
Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP. Built 1992 Comes in 3 sections.
Asset ID: 7553
Available: 1
Cooling Tower 680 ton
Used BAC Cooling towers, Model VT1-680-PMC. Certified Capacity 680 tons, 1750 USGPM of water from 95F to 85F at 78F entering wet bulb and 0.9 psig spray pressure. (2) 25 HP fan motors, 1800 RPM, 3 phase, 60 Hz, 230/460, standard TEFC enclosure, fan drives based on 0" ESP....
Cooling Towers
Asset ID: 2092
Available: 4
### Modular Portable Cooling Towers 3,000 ton each (45 MMBTU/hr) ###
These Veritec cooling towers are designed and manufactured to provide the most cooling possible while maintaining easy portability. These units are completely self - contained and can be up and running within hours of arriving on the job site. If needed, portable pumping units and reservoir tanks can also be provided. Nominal Rating - 3000 tons (9000 GPM I 95F HW I BSF CW I 78 degree wet bulb). Steel basin, 4 fans per cell. New in 2021 and were in service 2 years in Louisiana. During that 2 years they ran only 6 months, then were placed in storage. Last inspected about 18 months ago - no issues and no rust. Qty (4) - priced separately
Asset ID: 2092
Available: 4
Cooling Towers
### Modular Portable Cooling Towers 3,000 ton each (45 MMBTU/hr) ### These Veritec cooling towers are designed and manufactured to provide the most cooling possible while maintaining easy portability....
COP Tanks & Systems
Asset ID: 1975
Available: 20
Clean Out of Place (C.O.P.) tanks - .All stainless steel 304. These are all new tanks. The quote offered is for this configuration but we offer 4 different sizes and configurations.
COP tank length 10 ft x width 24 " x depth 22 ". Overall height 40 ". Internal spray manifolds and external spray manifolds. Solution pump: 5 HP 3,500 rpm 230v 3/60. Includes (4) 6" caster wheels. See tank drawing in Document Link.
- For 6 foot long COP tank subtract $1,500 from quotation
- For 8 foot long COP tank subtract $600 from quotation
- For 12 foot long COP tank, add $1,350 to quotation
- Note: a pipe draining rack can be provided, we can furnish COP tanks with or without recirculating pump