Equipment
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
All Assets from Category 'Material handling'
30 Results
Sort:
Relevance
Refine Assets By
Selected Filters
Search In These Assets
Category:
Manufacturer
Condition
Motor HP
Material
Include all
Heat Exchanger
Include all
TEMA
Include all
Cyclone 10' dia
Asset ID: CYVM-11
Available: 4
Cyclones approx 10 ft dia x 39 feet tall. There are (4) of these, priced separately - same design but two are opposite handed. Includes a header for a set of twor.
Asset ID: CYVM-11
Available: 4
Cyclone 10' dia
Cyclones approx 10 ft dia x 39 feet tall. There are (4) of these, priced separately - same design but two are opposite handed. Includes a header for a set of twor.
Preseparator
Asset ID: VK-2026
Available: 1
Preseparator 45" x 84". Overall Physical size approx 14' 4" wide x 18' 10" deep x 27' 4" tall. Weight 19,000 poundsr.
Asset ID: VK-2026
Available: 1
Preseparator
Preseparator 45" x 84". Overall Physical size approx 14' 4" wide x 18' 10" deep x 27' 4" tall. Weight 19,000 poundsr.
Drums, Stainless
Asset ID: 2051
Available: 1
Stainless steel drums. Approx 11 drums with reinforcing bands, and 16 drums without reinforcing band. Quantity (27) - priced for the LOT. Part of an entire CBD extraction system - enter PK6020 to see all components.
Asset ID: 2051
Available: 1
Drums, Stainless
Stainless steel drums. Approx 11 drums with reinforcing bands, and 16 drums without reinforcing band. Quantity (27) - priced for the LOT. Part of an entire CBD extraction system - enter PK6020 to see all components.
Screener
Asset ID: SR-1611
Available: 1
Corn screener by Mitchell. 48" x 96 inches designed to handle 8,000 bu/hr. Screen is 5/8" x 5/8" x 0.250 wire. Rotary drum driven by 2 HP motor.
Asset ID: SR-1611
Available: 1
Screener
Corn screener by Mitchell. 48" x 96 inches designed to handle 8,000 bu/hr. Screen is 5/8" x 5/8" x 0.250 wire. Rotary drum driven by 2 HP motor.
Compressor Oil Turbo
Asset ID: B2095
Available: 8
Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately
Asset ID: B2095
Available: 8
Compressor Oil Turbo
Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately
Compressor Oil Gas & Process
Asset ID: B2096
Available: 1
Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.
Asset ID: B2096
Available: 1
Compressor Oil Gas & Process
Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.
Hammermill
Asset ID: X2103
Available: 1
Hmmermill, no motor
Asset ID: X2103
Available: 1
Hammermill
Hmmermill, no motor
Wood Grinder
Asset ID: 7444
Available: 1
## Wood Grinder ##
Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2
- Infeed opening 30" x 18"
- Powered by 100 HP Lincoln AC Motor, TEFC Energy Efficient, RPM 1765, Frame 405T, Volts 230/460, Amps 226/113, 3 Phase, 60 Hz
- Safety switches on all guards and doors to shut the machine off and not allow to turn on when guards or inspection doors are opened.
- Wood Grinder has been reconditioned and owner says it is in great working condition. Customer will have to make that decision. We are selling As Is Where Is.
- This grinder was being used to make mulch.
Asset ID: 7444
Available: 1
Wood Grinder
## Wood Grinder ## Arasmith MFG. Co. - Service No....
Hammermill 350HP
Asset ID: 5636
Available: 2
### CHAMPION 48x38 STANDARD HAMMER MILL 350HP###
- Two units available (priced separately)
- Standard features include: Gravity bottom discharge, Sliding door design each side, Dynamically-balanced rotor, Alloy steel rotor shaft, Abrasion resistant wear liners. Flexible motor coupling, Inboard and outboard bearings, Screen carriage, Regrind chamber, One four-row set of Champion Diamond 1/4” x 8-3/16” swing hammers, •1-1/4” 4140 hardened hammer pins, Trapped key interlock electro-mechanical door locks, Bearing Temperature Probes,
- Air Operated Flow Director with Position Indicators. Includes double acting air cylinder and solenoid operated directional control valve, Includes proximity sensors to indicate flow director position, Sensors rated at IP67; ATEX certified, Operating voltage 20-250 AC/DC, Minimum air requirement:100 PSI/40 CFM
- 350 HP 3/60/460/1800 Cl II Gr G Div 1 Motor
- CHAMPION HRF48 ROTA’FEEDER
Standard features for Rotafeeder include: Stainless steel housing, Self-cleaning molded urethane pockets, Magnum series swing-out magnet, Quick-cleaning, air-operated SS stripper plate, Air inlet with sliding gate, Tramp catch bag, 1.5 HP Cl II Gr G 50 or 60 cycle inverter duty motor and drive, with guard
Asset ID: 5636
Available: 2
Hammermill 350HP
### CHAMPION 48x38 STANDARD HAMMER MILL 350HP### - Two units available (priced separately) - Standard features include: Gravity bottom discharge, Sliding door design each side, Dynamically-balanced rotor, Alloy steel rotor shaft, Abrasion resistant wear liners....
Grinding Mill
Asset ID: 7770
Available: 1
Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.
Asset ID: 7770
Available: 1
Grinding Mill
Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.
Fine Grind Air Swept Mill
Asset ID: 2037
Available: 1
Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010. Driven by 400 HP motor 3/60/460v 1790 rpm. **Comes with 400 HP soft start**
Asset ID: 2037
Available: 1
Fine Grind Air Swept Mill
Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010....
Rotary Valve 30"
Asset ID: RV-5201
Available: 1
Rotary motor driven airlock valve by Rotolok. Size 30" x 30" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 18 rpm. Machine number 75RVSISA6B, Type 39577, ser num 52964. Used as RVAL-11 PreSeparator airlock.
Asset ID: RV-5201
Available: 1
Rotary Valve 30"
Rotary motor driven airlock valve by Rotolok. Size 30" x 30" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 18 rpm. Machine number 75RVSISA6B, Type 39577, ser num 52964....
Rotary Valve 24"
Asset ID: RV-5204
Available: 1
Rotary motor driven airlock valve by Rotolok. Size 24" x 24" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 25 rpm. Used as RVAL-13 under cyclone screw conveyor.
Asset ID: RV-5204
Available: 1
Rotary Valve 24"
Rotary motor driven airlock valve by Rotolok. Size 24" x 24" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 25 rpm. Used as RVAL-13 under cyclone screw conveyor.
Rotary Valve 18"
Asset ID: RV-5206
Available: 1
Rotary motor driven airlock valve by Rotolok. Size 18" x 18" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1.5 HP motor 460/3/60 at 24 rpm. Machine number 45RVSISA6B, ser num 52964. Used as RVAL-13 under fluid bed dryer.
Asset ID: RV-5206
Available: 1
Rotary Valve 18"
Rotary motor driven airlock valve by Rotolok. Size 18" x 18" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1.5 HP motor 460/3/60 at 24 rpm. Machine number 45RVSISA6B, ser num 52964. Used as RVAL-13 under fluid bed dryer.
Rotary Valve 14"
Asset ID: RV-5207
Available: 1
Rotary motor driven airlock valve by Rotolok. Size 14" x 14" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1 HP motor 460/3/60 at 29 rpm. Used as RVAL-32 under baghouse.
Asset ID: RV-5207
Available: 1
Rotary Valve 14"
Rotary motor driven airlock valve by Rotolok. Size 14" x 14" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1 HP motor 460/3/60 at 29 rpm. Used as RVAL-32 under baghouse.
Rotary Valve (2) 20"
Asset ID: RV-5202
Available: 2
Rotary motor driven airlock valve by Rotolok. Size 20" x 20" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 2 HP motor 460/3/60 at 25 rpm. Used as RVAL-12 A and RVAL-12B under cyclone screw conveyor. Quantity (2) priced separatelyr.
Asset ID: RV-5202
Available: 2
Rotary Valve (2) 20"
Rotary motor driven airlock valve by Rotolok. Size 20" x 20" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 2 HP motor 460/3/60 at 25 rpm. Used as RVAL-12 A and RVAL-12B under cyclone screw conveyor....
Hoist 5 ton
Asset ID: VK-1999
Available: 1
Harrington 5 ton chain hoist serial number 184897. Electric with pendant. Last inspected 5/31/2018. Used in wet grind. NOTE: This equipment is for sale but currently installed and not available until late 2023.
Asset ID: VK-1999
Available: 1
Hoist 5 ton
Harrington 5 ton chain hoist serial number 184897. Electric with pendant. Last inspected 5/31/2018. Used in wet grind. NOTE: This equipment is for sale but currently installed and not available until late 2023.
Hoist 10 ton
Asset ID: VK-2003
Available: 1
Harrington hoist, rated 10 ton. Model 70SY7644. Sn122450. Pendant control. Includes travel motor and hoist motor. Beam not included. Last inspected 5/31/2018. Used as east centrifuge hoist. NOTE: This equipment is for sale but currently installed and not available until late 2023.
Asset ID: VK-2003
Available: 1
Hoist 10 ton
Harrington hoist, rated 10 ton. Model 70SY7644. Sn122450. Pendant control. Includes travel motor and hoist motor. Beam not included. Last inspected 5/31/2018. Used as east centrifuge hoist. NOTE: This equipment is for sale but currently installed and not available until late 2023.
Lift Truck, Straddle Manual
Asset ID: B2067
Available: 1
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030399. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Asset ID: B2067
Available: 1
Lift Truck, Straddle Manual
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030399. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Lift Truck, Straddle Manual
Asset ID: B2068
Available: 1
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030400. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Asset ID: B2068
Available: 1
Lift Truck, Straddle Manual
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030400. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Lift Truck, Straddle Manual
Asset ID: B2069
Available: 1
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030327. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Asset ID: B2069
Available: 1
Lift Truck, Straddle Manual
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030327. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Lift Truck, Straddle Manual
Asset ID: B2070
Available: 1
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 035476. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Asset ID: B2070
Available: 1
Lift Truck, Straddle Manual
Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 035476. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.
Chain Hoist 10 Ton
Asset ID: B2073
Available: 1
Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7176. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high
Asset ID: B2073
Available: 1
Chain Hoist 10 Ton
Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7176. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high
Chain Hoist 10 Ton
Asset ID: B2074
Available: 1
Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high
Asset ID: B2074
Available: 1
Chain Hoist 10 Ton
Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high
Telehandler Lull 944E-42
Asset ID: 1950
Available: 1
**JLG telehandler Lull** (zoom boom). Ser number 0160057653. See spec sheet and manual in Document link below.
- Rated capacity 9,000 lb
- Maximum lift height 42 feet
- Forward reach 35 feet
- Cummins QSB4.5T Turbo Diesel
- 4 speed forward, 3 reverse
- Full time 4-wheel drive, tires air filled
- Hours 10,850 (Photo shows 1350 and original meter was changed out at 9500)
Asset ID: 1950
Available: 1
Telehandler Lull 944E-42
**JLG telehandler Lull** (zoom boom). Ser number 0160057653. See spec sheet and manual in Document link below....
Base with Load Cells
Asset ID: AF3
Available: 1
Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N. See dataweigh.com and brochure in Links.
Asset ID: AF3
Available: 1
Base with Load Cells
Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N....
Hopper 590cf
Asset ID: AF7
Available: 1
Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft. Has bin vibrators on side and VibraRod vibratory level sensor on top. Closed top with approx 18" round inlet to accept drop from conveyor or feed.
Asset ID: AF7
Available: 1
Hopper 590cf
Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft....
Weigh Scale
Asset ID: SC-1611
Available: 1
Weigh Scale. Upper garner, scale, lower garner. Hydraulic power pack 5HP for knife gate valves on both garners and scale hoppers. Still installed, removal extra.
Asset ID: SC-1611
Available: 1
Weigh Scale
Weigh Scale. Upper garner, scale, lower garner. Hydraulic power pack 5HP for knife gate valves on both garners and scale hoppers. Still installed, removal extra.
Flatbed Trailer Drop Deck
Asset ID: AF98
Available: 1
Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.
Asset ID: AF98
Available: 1
Flatbed Trailer Drop Deck
Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.
Biomass Bale Handling & Grinder System
Asset ID: 1710
Available: 1
### Biomass Bale Handling System ###
- 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse
- Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high.
- Capacity 465 tons/day x 4 lines - 1,860 TPD.
Each line can hold 2 trucks worth of bales prior to the singulator (150 tons total (288 bales). Each line includes automatic singulation, de-stringing, coarse chop of bales, hydraulic power pack, and then grinders. The silo collects "fines" from the operation for disposal. This system fed an ethanol plant, and a biomass boiler/cogeneration system. Ideal for both. Grind size was <1” but screens can be changed to modify grind size. The biomass handling equipment would work perfectly in preparing biomass for a pelleting operation, or for burning in a biomass boiler from the included silo. Or this could be entirely repurposed to your need. Built 2013 - in very good condition. The general layouts and general description of this equipment are attached as links for more detailed information.
This system has been removed except for the silo/baghouse system.
- See links for drawings and description.
- See video of system in links - biomass system starts at 0:57 second mark.