Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item FP311 - Absorber & Gas CleanUp Module
Manufacturer
Model

Syngas and absorber gas cleanup modules - from Syngas quench output. Includes absorber module, solvent recirculation & cooling system and heat exchangers, and Frick refrigeration system. Designed for SynGas flow at 101,940 #/hr and solvent system cools 1.68 MMBTU/hr. This complete system is like new - built in 2009 but only ran 42 days. Still installed. For a complete list of components & photos of this FP311 module - enter fp311 in the search terms box. For complete methanol system, please enter fp100. Mass balances available.

Place Holder
Item 21-BN-110A - Burners Radiant Wall (36)
Manufacturer
Zeeco
Model
RWSF-4
Capacity
1

Zeeco radiant wall round flame burners, model RWSF-4. Shop order 17928. Fired with natural gas or syngas. Heat max per burner is 1.25 MMBTU, normal heat is 1.1 MMBTU. Gas line 3/4 inch, pilot line 1 inch. Physical size is approx 22" x 22" x 44" OAL. Lo-NOx, side fired. Stable flame over a wide range of conditions. Total Heat Load for all burners is 19.8 MM BTU/HR. Qty 36 - priced for all, includes removal and loading on your truck. NOTE: <Main photos show screw feeder still installed. It has now been removed and is in the laydown yard. See other photos>

Place Holder
Item 21-BN-132 - Burners Ultra Lo NOx (4)
Manufacturer
Zeeco
Model
GLSF-14

Zeeco round flame gas burners model GLSF-14 Free Jet Ultra Lo NOx - predicted 6 ppmv to 20 ppmv. Shop order 17928. Maximum heat per burner is 11 MMBTU, normal heat 9 MMBTU each. Operates on natural gas or syngas. Flame stable over a wide range of conditions - Turndown 10:1 or greater. Mounting options up-fired or side-fired. Max predicted flame 16.4 ft, max predicted width 2.5 ft. Total Heat duty for all 4: 44 MM BTU/Hr. Quantity (4) - priced for all, includes loading on your truck. Gas train skid available for these 4 burners - see item 21-BMR. NOTE: <Main photos show screw feeder still installed. It has now been removed and is in the laydown yard. See other photos>

Place Holder
Item 21-VV-608 - Butterfly Valve & Actuator
Manufacturer
Model

Stainless steel butterfly valves, 18 inch with pneumatic actuators. Qty (3) - priced for all. Like new. Used for 42 days

Place Holder
Item 41-CA-196 - Catalyst - Sulfur Guard Bed
Manufacturer
Haldor Topsoe
Model

Catalyst - 2 drums of sulfur guard by Haldor Topsoe HTZ-4. 80-90% zinc oxide and 10-15% aluminum oxide, ans 2 drums of Haldor Topsoe A/S. Alumina: 7 drums of alumina support balls packing rings. Catalyst: 3 drum TotsuCat AMA-1 catalyst. New drums

Place Holder
Item FP41 - Catalytic Conversion System - SynGas
Manufacturer
Model

Catalytic conversion of syngas to alcohols. Includes catalytic converter 41-R-168 designed for 3.9 MMBTU/hr, slipstream system partial, Synloop compressor at 1650 psig at 600HP, interconnecting piping and instruments. Catalytic converter currently loaded with methanol catalyst. Equipment was installed in 2009 - only ran 42 days. Like New. Includes modules 411 Alcohol synthesis, 413 Syngas conditioning, 414 Alcohol cooling & separation, 415 Synloop compression. Part of Methanol Plant asset number fp100

Place Holder
Item 41-R-168 - Catalytic Converter Reactor
Manufacturer
Wagner
Model
3.9 MMBTU
Capacity
7600

Catalytic Converter designed for 3.9 MMBTU/hr. Design specifications are for 14,500 gallons/day crude methanol or 12,500 gal/day mixed alcohols. Mfg by Wagner Plate Works in 2009. Size approx 7 ft dia ID x 17 ft s/s x 30 ft overall height for approximately 7,600 gallons capacity - tube bed approx 17 ft long. Has 1,028 x 1-1/2" tubes Sch 80 stainless steel TP304L, shell cs 516-70 4 inch thick. ASME Nat'l Bd 55, MAWP 2250 psig/FV at 650 F. Converter currently loaded with approx 150 cu ft methanol catalyst - Sud Chemie MegaMax 700. Still installed - price does not include removal. Note: we have the complete reactor module as well with all pieces shown in photos plus instruments - see asset ID FP411.

Place Holder
Item FP411 - Catalytic Converter Reactor Module
Manufacturer
Model

Reactor - Alcohol synthesis and HP steam system - Syngas catalytic converter module with converter, steam drum, structural steel, and all instruments. Loaded with conventional methanol catalyst currently. Includes structure, all piping, all auxiliary instruments attached to module. Still installed - price does not include removal. For a list of all components enter fp411 in search terms box.

Place Holder
Item 21-B-608 - Centrifugal Blower
Manufacturer
New York Blower
Model
2000 cfm
Capacity
2000

Centrifugal blower mfg by New York Blower. This is a 30 CI fan belt-driven by 7.5HP Baldor motor, 2000 cfm at 800F, 7.5 s.p. This fan is in excellent condition, having run only 42 days. Built 2008. Removed - ready to load.NOTE: <Main photos show screw feeder still installed. It has now been removed and is in the laydown yard. See other photos>

Place Holder
Item FP132 - Centrifugal Multi-stage Pump
Manufacturer
Sulzer
Model
MBN40-180/07

Sulzer pump, New in crate. Sulzer Medium Pressure Stage Casing Pump, model MBN40-180/07, S/N 100070291. Designed for 197 gpm at 1,376 TDH at 70F. Used as Lean Solvent Pump. NOTE: The base plate and the motor can be provided as well for a complete pumping unit - for an additional cost. Siemens 125HP motor SN E09T0042NPX 001, Amps 138, rpm 3575, Frame 444TS 460/3/60. (See asset ID 31-MT-240A.)

Place Holder
Item 31-Z-204 - Chiller 140 Ton
Manufacturer
Industrial Refrigeration Systems
Model
Frick 140 ton
Capacity
140

Complete chiller system - Refrigeration system. Ammonia chilling & solvent recirculating, Has Frick 140 ton rotary screw ammonia (R717) compressor with a capacity of 1.68 MMBTU/hr of Syngas at a flow of 101,940 #/hr 46/13F. Motor 250HP 3500rpm 460v/3/60. ASME rated at 450/FV at 350F. Frick ammonia compressor model RXF-101-H, s/n 10240E92525967 with liquid injection cooling. Includes Quantum LX control panel. Water cooled ammonia condensing unit uses 750 gpm water. Includes Evaporator, Condenser, Receiver on skid, auxiliary instruments attached to equipment, structure. Built by Industrial Refrigeration Systems in Aug 2009. The touch screen has suffered sun damage and will have to be replaced. Last used for solvent cooling with ammonia in syngas process. Like new - only ran 42 days. Shut down in Jan 2011. Still installed - price does not include removal. For components - enter Z204 in search box

Place Holder
Item 31-V-232 - Coalescer Filter
Manufacturer
Clark-Reliance
Model

Coalescer vessel, ASME MAWP 1650 psig/FV at 350F, Nat'l Bd# 3771, s/n CR-09-14436. Carbon steel. Built by Clark Reliance in 2009 - used 42 days, like new. Holds 5 filter elements. Used as 4th Stage Booster Discharge Coalescer - not sold separately, part of compressor module fp315

Place Holder
Item 41-V-160 - Coalescer Filter
Manufacturer
Clark Reliance
Model
AFC-9

Coalescer designed for 99.98% removal at 0.3 micron. Built by Clark Reliance Corp in 2009 - ran 42 days - like new. ASME MAWP 1650 psig at 250F. Nat'l Bd# 3772, s/n CR-09-14443. Material carbon steel. Uses Anderson filter element CRC-436-003-V (qty 5). Part # AFC-9-RTJC. Includes Jerguson magnicator level indicator. Used for Synloop Compressor Coalescer, part of module FP415.

Place Holder
Item 31-FL-192A - Coalescer Filter
Manufacturer
TM Industrial
Model
Coalescer

Coalescer Filter Rated at 15683 #/hr, 100 PPMW solids, 5 psig DP. ASME MAWP 800 psig at 250F external/FV at 350F, Nat'l Bd# 6164, s/n 6169. Capacity 5958 ACFH, 1 micron. Material is carbon steel. Used as Gas Clean-up Pre-Filter/Coalescer.

Place Holder
Item 31-FL-192B - Coalescer Filter
Manufacturer
TM IndustrialCoalescer
Model

Coalescer filter Rated at 15683 #/hr, 100 PPMW solids, 5 psig DP. ASME MAWP 800 psig at 250F internal/FV at 350F, Nat'l Bd# 6165, s/n 6170. Capacity 5958 ACFH, 1 micron. Material is carbon steel. Used as Gas Clean-up Pre-Filter/Coalescer.

Place Holder
Item 31-V-144 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model

Compressor dampener pressure vessel - ASME MAWP 425 psig at 250F, Nat'l Bd# 1302, s/n 09-113. Carbon steel. Built by Toromont n 2009 - Last used as 2nd stage booster suction bottle. Part of Compressor 31-K-120, not sold separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 31-V-148 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model

Compressor dampener pressure vessel - ASME MAWP 425 psig at 350F, Nat'l Bd# 1303, s/n 09-114. Carbon steel. Built by Toromont in 2009. Used as 2nd stage booster suction bottle. Part of Compressor 31-K-120, not sold separately. NOTE: These dampeners have now been removed from the compressor. The main picture showS them as installed. Removed and ready to load

Place Holder
Item 31-V-160 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model

Compressor dampener pressure vessel - ASME MAWP 1285 psig/FV at 350F, Nat'l Bd# 1304, s/n 09-115. Built by Toromont in 2009 - was run 42 days - like new. Carbon steel. Used as 3rd stage booster suction bottle. Part of Compressor 31-K-216, not sold separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 31-V-168 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model

Compressor dampener horizontal pressure vessel. ASME MAWP 1285 psig/FV at 350F, NB# 1305, s/n 09-116. Carbon steel. Built in 2009 by Toromont - used 42 days - like new. Used as 3rd stage booster discharge bottle. Part of Compressor 31-K-216, not sold separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 31-V-172 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model

Compressor dampener pressure vessel - ASME MAWP 1850 psig/FV at 250F, Nat'l Bd# 1306, s/n 09-117. Carbon steel. Used as 4th stage booster suction bottle. Part of Compressor 31-K-216, not sold separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 31-V-176 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model

Compressor dampener pressure vessel - ASME MAWP 1850 psig/FV at 350F, Nat'l Bd# 1307, s/n 09-116. Built by Toromont in 2009 - ran 42 days - like new. Carbon steel. Used as 4th stage booster discharge bottle. Part of Compressor 31-K-216, not sold separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 41-V-148 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model
50 gallons
Capacity
50

Horizontal pressure vessel compressor dampener. Built by Toromont in 2009 - used 42 days: Like New. ASME MAWP 1850 psig at 350F, Nat'l Bd# 1309, s/n 09-120. Physical size 16" dia x 60" for 50 gallon capacity. Used as Synloop Compressor Discharge Bottle 1. Part of compressor 41-K-140, not for sale separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 41-V-156 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model
50 gallons
Capacity
50

Horizontal pressure vessel compressor dampener. Built by Toromont in 2009 - used 41 days: Like New. ASME MAWP 1850 psig at 350F, Nat'l Bd# 1310, s/n 09-122. physical size 16" dia x 60" for capacity of approx 50 gallons. Used as Synloop Compressor discharge dampener bottle #2. Part of compressor 41-K-140, not for sale separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 41-V-144 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model
50 gallon
Capacity
50

Horizontal pressure vessel compressor dampener. Built by Toromont in 2009 - used 42 days: Like New. ASME MAWP 1650 psig at 250F, Nat'l Bd# 1308, s/n 09-119. Physical size 16" dia x 60". Used as Synloop Compressor Suction Bottle 1. Part of compressor 41-K-140, not for sale separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder
Item 41-V-152 - Compressor dampener pressure vessel
Manufacturer
Toromont
Model
50 gallons
Capacity
50

Horizontal pressure vessel compressor dampener. Built by Toromont in 2009 - used 41 days: Like New. ASME MAWP 1650 psig at 250F, Nat'l Bd# 1299, s/n 09-121. Physical size 16" dia x 60" for capacity of 50 gallons. Used as suction dampener (on top - stage 1). Part of compressor 41-K-140, not for sale separately. NOTE: These dampeners have now been removed from the compressor. The main picture shows them as installed. Removed and ready to load

Place Holder