Gearbox for Agitator, NEW. ProQuip Model ZF-20. This is gearbox only but was designed for top entering agitator on tank 21 ft tall, 10,000 gallon capacity. See drawing link for original installation [shaft, propeller, motor not included]. Gearbox designed for 3 HP, 1800 rpm input, gear ration 20.5.

FNW Automatic valve, Model 600, Size 3 inch flanged 2-way, material ss316 Pneumatic actuator valve w/ Kinetrol Model 090 air actuator, ANSI 150#

FNW Automatic valve, Model 600, Size 2 inch flanged 2-way, material ss316 Automatic valve w/ Kinetrol "AP" Positioner air actuator, ANSI 150#, with indicator

Automatic valve, FNW model 600 w/ Air actuator, Material 316ss. ANSI 150#

Gardner Denver Series 45 Duro Flow positive displacement lobe blower vacuum pump. Model GGDECDA, Cat # 4518. Used - in service. Rated at rpm from 1750 to 4000, cfm to 1875, vacuum to 16Hg. See link for data sheets.

SLC 500 Coupler DH-485 link coupler

Distillation column - last used as a beer mash distillation. Stainless steel shell/trays ss304. MAWP FV/15 at 350F. Tray type columns with 22 trays. Model BS-410, S/N 90359601. Size is 78 inch dia x 44 ft s/s. Sits on skirt for 54 ft-10 in OAH. Sulzer MVG 12 gauge. Capacity 11,100 gallons, MT weight 19,500 pounds. Sold As Is Where Is - but we can manage removal for you as add-on option

Distillation column, tray type last used as rectification column in ethanol process. Stainless steel 304 shell/trays - 29 trays. MAWP fv/15 at 350F. Size is approx 90 in ID x 48ft-3in s/s. Sits on skirt for 55ft-5in OAH. Model BS-420, S/N 90359603, Sulzer SVG 14 gauge. Capacity 17,000 gallons, MT weight 21,500 pounds. Produced 190 proof ethanol. Bottom product contained approximately 25%-30% ethanol. Includes 2" insulation. Sold As Is Where Is - but we can manage removal for you as add-on option

Eagle Burgmann Expansion Joint, Part No. ES-40020-164-M1-LR-V, stainless steel for 16 inch pipe size x 16.5 in long uncompressed.

Gearbox for Agitator, rebuilt. ProQuip Model ZF-20. This is gearbox only but was designed for top entering agitator on tank 21 ft tall, 10,000 gallon capacity. See drawing link for original installation [shaft, propeller, motor not included]. Gearbox designed for 3 HP, 1800 rpm input, gear ration 20.5.

Approx 49 plates for Alfa Laval plate heat exchanger X-400 - priced for the lot

Alfa Laval Plate & Frame Heat Exchanger, Model EC-500-WTFE, sn 30105-54319. MAWP 55 psi at 302F, Nat'l Bd# 15636 Surface area 880.4 sf with (31) plates. Plates are 0.6 mm plates cassettes. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.

Tranter Plate & Frame Heat Exchanger, Model TW-108-HP-33. MAWP 150 psi at 250F; Surface area 277.8 sf w/approx 26 plates. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.

Alfa Laval Plate & Frame Heat Exchanger, Model FC-500-WTFE., sn 30105-54317. MAWP 55 psi at 302F. Surface area 539.6 sf, (19) plates at 0.6 mm gap cassette. Frame will be cleaned and painted. Includes plates. Entire heat exchanger has been disassembled and repainted. Plates are stacked ready to ship.

Shell & Tube Heat Exchanger, Perry Products Model 34-2820 FTSX, S/N B-5434. MAWP shell/tube 75 psi at 320F. Surface area 2,820 sf, size 34" O.D. x 22 ft-9" long. Shell cs, tubes ss304. Tubes (544) 1" OD x 18ga. MT weight 11,500 pounds

JD Cousins Superheater horizontal Shell & Tube Heat Exchanger, S/N 901-8. ASME Nat'l Bd# 7483, MAWP shell 150 psi at 400F, tubes 80 psi at 400F. Heating surface area 538.6 sf, Materials - shell carbon steel SA-53, tubes stainless steel 316. Has 10 inch flanged connections for vapor, 4 inch flanged connections for steam, and 3/4 inch shell drain. Has expansion joint. Last used as ethanol condenser.

Toshiba Motor, Frame 215T, TEFC 10 HP, 1785 rpm 460/3/60

Baldor-Reliance Motor, Frame 286T, TEFC 20 HP 1180 rpm, Cat. No. EM4102T 460/3/60

WEG Motor, Model BL-20-12-286T, TEFC Frame 286T, 20 HP, 1170 rpm, 460/3/60 Hz

US Motors motor, Frame 326T, TEFC 25 HP, 885 rpm, Cat No. H25E4E, Model R055A 460/3/60

TEFC 25 HP Motor, 3515 RPM, Model B0252FLG3UMW, Type TIKK 230-460/3/60

30 HP Motor, 1800 RPM, Frame 286T

Siemens motor, Frame 326T, TEFC 50 HP, 1780 rpm, Part # 1MB21213AB216AG3, S/N E11T0879XPE 2 460/3/60

Siemens motor, Frame 326T, TEFC 50 HP, 1780 rpm, Part # 1MB21213AB216AG3, S/N B11T0879XPE 23. 460/3/60

Viking Gear Pump base - Gear model 3-551-008-331, Pump base with Baldor motor 7.5 HP, 213 T Frame, 1770 rpm and gear box only. No pump. Base has concrete in it.