Cook tube vertical stainless steel tank on cs skirt. Mfg by Kennedy Tanks capacity 4,300 gallons size 6'-6" Dia x 16.0' x 22 ft OAH. ASME NB# 7714, MAWP 150psi/FV at 366F. Material ss304L/cs skirt. Dish top/dish bottom - insulated, side entering manhole. Includes Lightnin Agitator model 15S2 Gear box gone, shaft & motor removed - almost no value left on agitator. See links for drawings of both tank and agitator.

Vertical carbon steel tank mfg by Fisher Tank, API 650 tank. 110,000 gallons Size 24 ft dia x 30 ft. Weight approx 33,761 pounds. 2007 CS. Last used as 200 Proof Storage Tank. Tank too big to move. Valued at scrap material only - no removal labor included. Used as 200 proof storage tank

Kaeser rotary screw Air Compressor capacity 450 ACFM @ 125 psig size CSD-100 driven by 100 HP motor 3800 rpm. 18,078 hours of operation. Has air cooling fan attached rated at 3 Hp Total input power at rated capacity and full load pressure - 96.34 kW. Last used as main Compressor No. 1

Kaeser rotary screw air Compressor capacity 450 ACFM @ 125 psig size Model CSD-100 driven by 100HP motor 3600 rpm; Has air cooling fan attached rated at 3 Hp Total input power at rated capacity and full load pressure - 96.34 kW

Kaeser rotary screw air Compressor capacity 450 ACFM @ 125 psig size Model CSD-100 driven by 100HP motor 3600 rpm; Has air cooling fan attached rated at 3 Hp Total input power at rated capacity and full load pressure - 96.34 kW. Serial number 1107. This was the "lag" compressor in a lead-lag arrangement. Lead compressor ran approx 8000 hours - this one ran much less but unable to read without powering up.

Kaeser rotary screw air Compressor capacity 450 ACFM @ 125 psig size Model CSD-100 driven by 100HP motor 3600 rpm; Has air cooling fan attached rated at 3 Hp Total input power at rated capacity and full load pressure - 96.34 kW. Serial number 1110. Shut down right after last service - service tag shows 8000 hours.

Air Compressor, self contained surge tank and refrigerated Dryer. Compressor driven by 10 HP motor 230-460v 3 phase. Speedaire dryer model 5Z657. 1/2 HP at 120v 1 phase

Kaeser externally heated desiccant regenerative Air Dryer capacity 503 ACFM @ 115 psig size KED-500 Material CS 6 KW heater attached to dryer 140 deg F dewpoint dryer. Weight approx 1,776 pounds

Kaeser heatless dryer model KADPS-930 - flow rated at 930 scfm plus filters (4) (FA-31420 & FA-31420 Model KPF-1000P, MAWP 225 psig @ 150F) plus final filter. Weight approx 2414 pounds.

Parker air filters, capacity 84 SCFM @ 100 psig size Inline 1.5" NPT Material 304L HEPA Filter - 0.5 Micron Model HN6S8DSJ. There are 2 of these - A & B. Last used for Yeast Tank Air Filter

Silvan Air Receiver, vertical. Size 48" dia x 116" s/s x 13' OAH for capacity approx 1,040 gallons Material CS. ASME Nat'l Bd 517885, MAWP 150 psi at 450F

Air receiver, Pressure air tank approx size 2.5' dia x 8' tall for capacity of 400 gallons. MAWP 150 psi at 450F, MDMT -20F @ 150psi. Used as compressed air wet tank in CoGen.

Silvan air receiver, vertical. ASME NB# 525115, MAWP 200 psi at 450F. Size approx 2 ft x 6 ft for capacity of approx. 200 gallons

ISCO/Hartco Anaerobic Influent Sampler size 3710FR Refrigerated Composite Sampler, flow proportioned, Sample chamber SPA-665. Part of Biothane anaerobic treatment module - for a list of all components, enter "PK7201" in keyword search box.

Biothane Corporation Anaerobic Treatment Module & skid. Designed for ethanol waste treatment at 338 gpm, COD 2500, BOD 1563, TSS 10 gpm. Excess biomass is periodically removed from the reactor vessel via the sludge pump. Includes pumps and ss reactor vessel. Supplied by Biothane Veolia. See link for PFD drawing. This is a complete system - for a list of components enter "PK7201" in keyword search box

Biofab BioBed Reactor Vessel Size gallons size 14' dia x 52' x 56'-6" OAH for a capacity of approx 59,400 gallons. Material ss304. Has internal standpipe, Has dent at top and on side near top. See photos. Physical weight approx 40,000 pounds. Includes vertical ladder and platforms, railing, any instrumentation on tank, piping manifold, sampling taps and tray, and instrumentation. Part of Biothane Anaerobic Treatment Module - for a list of all components, enter "PK7201" in keyword search box. Used as reactor vessel for Biothane anaerobic treatment module (ATM)

Biothane ATM Control Panel Part of Biothane package PK-7201. For all components, enter "PK7201" in keyword search box.

10 inch ss Butterfly valve at Mole Sieve 1

Back Flow Preventer System. All 16 inch pipe with 10 inch meter

Dust filter baghouse, mfg by IAC Model 120TB-BVI-81:S6. Has 81 filter bags bottom load type 6" x 123" OAL. Bag house with 20 HP motor. Baghouse sits on top of Ash Bin TS-9143, Fan is Cincinnati fan RBE-15 designed for 5100 cfm at 5" sp. - driven by 20 HP motor. See links for drawings & data. Last used as dust filter on top of Ash storage silo.

[PRELIM - Seller may want to keep - Make OFFER]. Thermal Kinetics Beer Column - 25 trays. Capacity 46 MMBTUH size 8'-6" dia x 66' s/s x 77'-2" OAH (including the 8 ft skirt) Design: Mfg by Alps Welding ser num 2089, ASME NB# 474,MAWP FV/25psig at 250F. Material ss304L with cs skirt. See links for data and drawings.

EnerFab Beer Well. Vertical ss tank 50 ft dia x 50 ft. calculated to be 734,398 gallons. Material is 304SS/CS Supports. Total weight ss304 = approx 152,000 pounds. Includes ladders, gratings, platforms, handrails. Does not include agitator (it is gone). But we can sell one of Fermenter agitators.

Two 36 inch wide x 40 ft long coal and lime transfer belts to main belt to combustor There are two systems here - sold as a set. Each has large dump hopper, independently driven conveyor. Variable feed rate from 2 to 50 TPH. Each belt driven by 10HP motor.

Trough belt conveying system and structure. Inclined trough belt conveyor mfg by Martin. Martin model S Class air supported belt. Size 24" wide x 450 ft long. Inclined conveyor has equivalent of 73 ft vertical lift - 150 fpm speed. Designed for 50 tons/hr of coal at 35 lb/cf and of lime at 87.5 lb/cf density. Has four blowers; each driven by 40 HP motor. Includes structural steel. Used to transport coal and line from hoop house to combustor.

Air Blower capacity ACFM Driven by 5HP motor, Material CS. Used as Dust Filter Reverse Air Blower under FA-1301. Part of Baghouse - priced with baghouse