Cyclone 10' dia

Asset ID: CYVM-11

Available: 4

Cyclones approx 10 ft dia x 39 feet tall. There are (4) of these, priced separately - same design but two are opposite handed. Includes a header for a set of twor.

Asset ID: CYVM-11

Available: 4

Cyclone 10' dia

Cyclones approx 10 ft dia x 39 feet tall. There are (4) of these, priced separately - same design but two are opposite handed. Includes a header for a set of twor.

Preseparator

Asset ID: VK-2026

Available: 1

Preseparator 45" x 84". Overall Physical size approx 14' 4" wide x 18' 10" deep x 27' 4" tall. Weight 19,000 poundsr.

Asset ID: VK-2026

Available: 1

Preseparator

Preseparator 45" x 84". Overall Physical size approx 14' 4" wide x 18' 10" deep x 27' 4" tall. Weight 19,000 poundsr.

Drums, Stainless

Asset ID: 2051

Available: 1

Stainless steel drums. Approx 11 drums with reinforcing bands, and 16 drums without reinforcing band. Quantity (27) - priced for the LOT. Part of an entire CBD extraction system - enter PK6020 to see all components.

Asset ID: 2051

Available: 1

Drums, Stainless

Stainless steel drums. Approx 11 drums with reinforcing bands, and 16 drums without reinforcing band. Quantity (27) - priced for the LOT. Part of an entire CBD extraction system - enter PK6020 to see all components.

Screener

Asset ID: SR-1611

Available: 1

Corn screener by Mitchell. 48" x 96 inches designed to handle 8,000 bu/hr. Screen is 5/8" x 5/8" x 0.250 wire. Rotary drum driven by 2 HP motor.

Asset ID: SR-1611

Available: 1

Screener

Corn screener by Mitchell. 48" x 96 inches designed to handle 8,000 bu/hr. Screen is 5/8" x 5/8" x 0.250 wire. Rotary drum driven by 2 HP motor.

Compressor Oil Turbo

Asset ID: B2095

Available: 8

Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately

Asset ID: B2095

Available: 8

Compressor Oil Turbo

Atlas Copco compressor oil, Turbo Oil Plus, PN6970298402, VG46 55 gallon drums. Fill date was Mar 26, 2021. New. Qty (8) - priced separately

Compressor Oil Gas & Process

Asset ID: B2096

Available: 1

Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.

Asset ID: B2096

Available: 1

Compressor Oil Gas & Process

Gas & Process Fluid VG 32 compressor oil, Atlas Copco PN6970390628 fill date March 5, 2021. NEW 55 gallon drum. Only one barrel remaning.

Hammermill

Asset ID: X2103

Available: 1

Hmmermill, no motor

Asset ID: X2103

Available: 1

Hammermill

Hmmermill, no motor

Wood Grinder

Asset ID: 7444

Available: 1

## Wood Grinder ## Arasmith MFG. Co. - Service No. 34.30.HH.1517.596 14.HT.2ADW/8 HAS2 - Infeed opening 30" x 18" - Powered by 100 HP Lincoln AC Motor, TEFC Energy Efficient, RPM 1765, Frame 405T, Volts 230/460, Amps 226/113, 3 Phase, 60 Hz - Safety switches on all guards and doors to shut the machine off and not allow to turn on when guards or inspection doors are opened. - Wood Grinder has been reconditioned and owner says it is in great working condition. Customer will have to make that decision. We are selling As Is Where Is. - This grinder was being used to make mulch.

Asset ID: 7444

Available: 1

Wood Grinder

## Wood Grinder ## Arasmith MFG. Co. - Service No....

Hammermill 350HP

Asset ID: 5636

Available: 2

### CHAMPION 48x38 STANDARD HAMMER MILL 350HP### - Two units available (priced separately) - Standard features include: Gravity bottom discharge, Sliding door design each side, Dynamically-balanced rotor, Alloy steel rotor shaft, Abrasion resistant wear liners. Flexible motor coupling, Inboard and outboard bearings, Screen carriage, Regrind chamber, One four-row set of Champion Diamond 1/4” x 8-3/16” swing hammers, •1-1/4” 4140 hardened hammer pins, Trapped key interlock electro-mechanical door locks, Bearing Temperature Probes, - Air Operated Flow Director with Position Indicators. Includes double acting air cylinder and solenoid operated directional control valve, Includes proximity sensors to indicate flow director position, Sensors rated at IP67; ATEX certified, Operating voltage 20-250 AC/DC, Minimum air requirement:100 PSI/40 CFM - 350 HP 3/60/460/1800 Cl II Gr G Div 1 Motor - CHAMPION HRF48 ROTA’FEEDER Standard features for Rotafeeder include: Stainless steel housing, Self-cleaning molded urethane pockets, Magnum series swing-out magnet, Quick-cleaning, air-operated SS stripper plate, Air inlet with sliding gate, Tramp catch bag, 1.5 HP Cl II Gr G 50 or 60 cycle inverter duty motor and drive, with guard

Asset ID: 5636

Available: 2

Hammermill 350HP

### CHAMPION 48x38 STANDARD HAMMER MILL 350HP### - Two units available (priced separately) - Standard features include: Gravity bottom discharge, Sliding door design each side, Dynamically-balanced rotor, Alloy steel rotor shaft, Abrasion resistant wear liners....

Grinding Mill

Asset ID: 7770

Available: 1

Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.

Asset ID: 7770

Available: 1

Grinding Mill

Used Sweco model M60MS Vibro-Energy grinding mill. 62" diameter X 3' high grinding chamber with 316 stainless steel liner and solid 316 stainless steel cover. 2" product discharge. Heating or cooling panels between inner and outer shell. 10 HP, 3 phase, 60 cycle, 460 volt motor.

Fine Grind Air Swept Mill

Asset ID: 2037

Available: 1

Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010. Driven by 400 HP motor 3/60/460v 1790 rpm. **Comes with 400 HP soft start**

Asset ID: 2037

Available: 1

Fine Grind Air Swept Mill

Stedman fine grind air swept mill, Model Micro Max 5400. Carbon steel. Designed for 5-7 tons/hr of Hi-Cal limestone, feed size 3/8". Output was set at 200 mesh. Sometimes got to 300 mesh. Chamber approximate 55" diameter. Double rotor. Serial no. MM010....

Rotary Valve 30"

Asset ID: RV-5201

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 30" x 30" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 18 rpm. Machine number 75RVSISA6B, Type 39577, ser num 52964. Used as RVAL-11 PreSeparator airlock.

Asset ID: RV-5201

Available: 1

Rotary Valve 30"

Rotary motor driven airlock valve by Rotolok. Size 30" x 30" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 18 rpm. Machine number 75RVSISA6B, Type 39577, ser num 52964....

Rotary Valve 24"

Asset ID: RV-5204

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 24" x 24" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 25 rpm. Used as RVAL-13 under cyclone screw conveyor.

Asset ID: RV-5204

Available: 1

Rotary Valve 24"

Rotary motor driven airlock valve by Rotolok. Size 24" x 24" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 3 HP motor 460/3/60 at 25 rpm. Used as RVAL-13 under cyclone screw conveyor.

Rotary Valve 18"

Asset ID: RV-5206

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 18" x 18" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1.5 HP motor 460/3/60 at 24 rpm. Machine number 45RVSISA6B, ser num 52964. Used as RVAL-13 under fluid bed dryer.

Asset ID: RV-5206

Available: 1

Rotary Valve 18"

Rotary motor driven airlock valve by Rotolok. Size 18" x 18" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1.5 HP motor 460/3/60 at 24 rpm. Machine number 45RVSISA6B, ser num 52964. Used as RVAL-13 under fluid bed dryer.

Rotary Valve 14"

Asset ID: RV-5207

Available: 1

Rotary motor driven airlock valve by Rotolok. Size 14" x 14" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1 HP motor 460/3/60 at 29 rpm. Used as RVAL-32 under baghouse.

Asset ID: RV-5207

Available: 1

Rotary Valve 14"

Rotary motor driven airlock valve by Rotolok. Size 14" x 14" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 110F. Driven by 1 HP motor 460/3/60 at 29 rpm. Used as RVAL-32 under baghouse.

Rotary Valve (2) 20"

Asset ID: RV-5202

Available: 2

Rotary motor driven airlock valve by Rotolok. Size 20" x 20" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 2 HP motor 460/3/60 at 25 rpm. Used as RVAL-12 A and RVAL-12B under cyclone screw conveyor. Quantity (2) priced separatelyr.

Asset ID: RV-5202

Available: 2

Rotary Valve (2) 20"

Rotary motor driven airlock valve by Rotolok. Size 20" x 20" cast iron precision bore with stainless steel eight vane rotor open end adjustable for temps up to 194F. Driven by 2 HP motor 460/3/60 at 25 rpm. Used as RVAL-12 A and RVAL-12B under cyclone screw conveyor....

Hoist 5 ton

Asset ID: VK-1999

Available: 1

Harrington 5 ton chain hoist serial number 184897. Electric with pendant. Last inspected 5/31/2018. Used in wet grind. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Asset ID: VK-1999

Available: 1

Hoist 5 ton

Harrington 5 ton chain hoist serial number 184897. Electric with pendant. Last inspected 5/31/2018. Used in wet grind. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Hoist 10 ton

Asset ID: VK-2003

Available: 1

Harrington hoist, rated 10 ton. Model 70SY7644. Sn122450. Pendant control. Includes travel motor and hoist motor. Beam not included. Last inspected 5/31/2018. Used as east centrifuge hoist. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Asset ID: VK-2003

Available: 1

Hoist 10 ton

Harrington hoist, rated 10 ton. Model 70SY7644. Sn122450. Pendant control. Includes travel motor and hoist motor. Beam not included. Last inspected 5/31/2018. Used as east centrifuge hoist. NOTE: This equipment is for sale but currently installed and not available until late 2023.

Lift Truck, Straddle Manual

Asset ID: B2067

Available: 1

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030399. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Asset ID: B2067

Available: 1

Lift Truck, Straddle Manual

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030399. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Lift Truck, Straddle Manual

Asset ID: B2068

Available: 1

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030400. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Asset ID: B2068

Available: 1

Lift Truck, Straddle Manual

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030400. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Lift Truck, Straddle Manual

Asset ID: B2069

Available: 1

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030327. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Asset ID: B2069

Available: 1

Lift Truck, Straddle Manual

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 030327. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Lift Truck, Straddle Manual

Asset ID: B2070

Available: 1

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 035476. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Asset ID: B2070

Available: 1

Lift Truck, Straddle Manual

Beech manual winch straddle crane lift. NEW, Old Stock. Model SMS-1000. Serial 035476. Lift truck capacity 1000 pounds, load center 13 inches, lift height 91 inches. Approx skid size for shipping 40" x 44" x 84" high. Made specifically for Siemens products.

Chain Hoist 10 Ton

Asset ID: B2073

Available: 1

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7176. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Asset ID: B2073

Available: 1

Chain Hoist 10 Ton

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7176. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Chain Hoist 10 Ton

Asset ID: B2074

Available: 1

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Asset ID: B2074

Available: 1

Chain Hoist 10 Ton

Chester 10 Ton Chain Hoist with trolley, manual. Model Zephyr, SN ZLG-7175. NEW, Old Stock. Low headroom trolley hoist. Approx size for shipping 29" x 50" x 36" high

Telehandler Lull 944E-42

Asset ID: 1950

Available: 1

**JLG telehandler Lull** (zoom boom). Ser number 0160057653. See spec sheet and manual in Document link below. - Rated capacity 9,000 lb - Maximum lift height 42 feet - Forward reach 35 feet - Cummins QSB4.5T Turbo Diesel - 4 speed forward, 3 reverse - Full time 4-wheel drive, tires air filled - Hours 10,850 (Photo shows 1350 and original meter was changed out at 9500)

Asset ID: 1950

Available: 1

Telehandler Lull 944E-42

**JLG telehandler Lull** (zoom boom). Ser number 0160057653. See spec sheet and manual in Document link below....

Base with Load Cells

Asset ID: AF3

Available: 1

Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N. See dataweigh.com and brochure in Links.

Asset ID: AF3

Available: 1

Base with Load Cells

Steel machine base with 3 load cells at 120 degrees apart. Base dimensions 80" x 80" on legs 28" tall. Construction is carbon steel 6" I-Beams. Load cells are Sartorius Type PR6011/30N by Sartorius Mechatronics, made in Germany. Rated at 10,000 kg each. New name Minebea Intec PR6011/30N....

Hopper 590cf

Asset ID: AF7

Available: 1

Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft. Has bin vibrators on side and VibraRod vibratory level sensor on top. Closed top with approx 18" round inlet to accept drop from conveyor or feed.

Asset ID: AF7

Available: 1

Hopper 590cf

Hopper feeder with screw conveyor under (see asset F5). Carbon steel. Hopper size 122" x 122" x 41" deep with 45 degree slope 52" deep to flanged outlet slot. Approx capacity 590 cu ft. On legs 11 ft long for OAH approx 18.75 ft....

Weigh Scale

Asset ID: SC-1611

Available: 1

Weigh Scale. Upper garner, scale, lower garner. Hydraulic power pack 5HP for knife gate valves on both garners and scale hoppers. Still installed, removal extra.

Asset ID: SC-1611

Available: 1

Weigh Scale

Weigh Scale. Upper garner, scale, lower garner. Hydraulic power pack 5HP for knife gate valves on both garners and scale hoppers. Still installed, removal extra.

Flatbed Trailer Drop Deck

Asset ID: AF98

Available: 1

Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.

Asset ID: AF98

Available: 1

Flatbed Trailer Drop Deck

Semi trailer - Drop deck trailer for semi truck. Mfg by Utility Trailer Corp in 1983. Length 45 ft x 96" wide. GVWR 90,000 pounds. VIN 1UY FS2448 EA9783 09.

Biomass Bale Handling & Grinder System

Asset ID: 1710

Available: 1

### Biomass Bale Handling System ### - 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse - Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high. - Capacity 465 tons/day x 4 lines - 1,860 TPD. Each line can hold 2 trucks worth of bales prior to the singulator (150 tons total (288 bales). Each line includes automatic singulation, de-stringing, coarse chop of bales, hydraulic power pack, and then grinders. The silo collects "fines" from the operation for disposal. This system fed an ethanol plant, and a biomass boiler/cogeneration system. Ideal for both. Grind size was <1” but screens can be changed to modify grind size. The biomass handling equipment would work perfectly in preparing biomass for a pelleting operation, or for burning in a biomass boiler from the included silo. Or this could be entirely repurposed to your need. Built 2013 - in very good condition. The general layouts and general description of this equipment are attached as links for more detailed information. This system has been removed except for the silo/baghouse system. - See links for drawings and description. - See video of system in links - biomass system starts at 0:57 second mark.

Asset ID: 1710

Available: 1

Biomass Bale Handling & Grinder System

### Biomass Bale Handling System ### - 4 infeed processing lines for bulk bale handling and grinder plus silo and baghouse - Bale size was 3' x 4' x 8' long - processed in modules of 6 (2 bales wide x 3 bales high. - Capacity 465 tons/day x 4 lines - 1,860 TPD....